As stated by Joe Taylor, RC3 is NOT designed for DXP until the full release. It uses 77 bit and none of the DXP are using that mode since it is still in beta. VP6D specifically stated NOT to use RC3 and use v1.9.1 for this exact reason.
On Tue, Oct 23, 2018 at 4:39 AM David Spoelstra <dav...@mediamachine.com> wrote: > Ubuntu 18.10 > WSJT-X V2.0.0-rc3 > > In normal mode everything decodes ok. Switch to FH mode and there is no > decode even though waterfall shows strong signals. Switch back to normal > mode and everything decodes. > > Switch back to 1.9.1 and both modes decode ok. > > Switch back to rc3 and same decode problem in FH mode. > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > -- George Cotton, WB5JJJ PO Box 1025 Russellville, AR 72811 479.968.7737 Home 479.857.7737 Cell DMR K5CS (Local Repeater) - 310515, CC1, TS2 DMR Arkansas - 3105 4
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
