Thanks for the response. As I mentioned in my post, it doesn’t work just fine on one slice. That’s one of the reasons I posted the question.
Does anybody have any actual knowledge about this? Thanks, Russ Sent from my iPhone > On Oct 25, 2018, at 9:16 PM, Black Michael via wsjt-devel > <wsjt-devel@lists.sourceforge.net> wrote: > > I don't know why you would need separate slices to work split in WSJT-X. > Aren't slices really for different frequency ranges? > Split in WSJT-X is all inside the audio band pass of one slice. It just > adjusts the frequency so that the audio is always in the 1500-2000Hz offset. > Split is really designed for rigs (or operators) that have harmonics on their > signal (usually from incorrect audio settings). > As long as you aren't hitting the ALC on your Flex your signal would be clean > and split is not needed. > But it should work just fine on one slice. > > de Mike W9MDB > > > > > On Thursday, October 25, 2018, 5:55:03 PM CDT, Star Light > <starlite4...@gmail.com> wrote: > > > > Hello, I have WSJT-X (v1.9.1) set up with my Yaseu FTdx9000 to operate full > (not “fake") split and it works great. WSJT-X seems to always listen on the > A side and set Tx on the B side (no matter how it’s set initially) and moves > the B side Tx freq around in a logical way. > > I’m not sure how to set up the corresponding configuration on my Flex. At > present I have it set to the A slice and listening through DAX 1 on the B > slice (to be “split”). It makes odd freq adjustments that don’t make sense > on the A Tx slice, never changes Tx to the B slice and never moves the DAX > slice choice no matter how I set it up. I don’t know what it is assuming and > can’t see any way to “tell it” it’s listening on the B slice. I don’t know > if it assumes that in setup or something else but seems to work best when set > up this way from a simply making contacts point of view. > > If I set Tx and DAX audio both on the A slice (always choosing split in > config), it will actually activate the B slice from time to time but never > set’s DAX audio output from it, or Tx to it. So it can’t actually be using > the B slice for anything. Then shortly after it activates it, it deactivates > it. > > Flex is a drop-down option so I know WSTJ-X “knows” about it, I just know how > it expects the physical radio to be set up to use it in split mode. Any > advice would be appreciated! Thanks, Russ KR6W > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
