Yes, I could wideband the transceiver. I still don't understand why after a transmission on 5.358.500 a CAT signal is being sent to the radio to change frequency to 5.358.308 if I put 5.358.500 in the frequency dropdown box and I turn off split operation. Apparently, this is NOT a bug in WSJT-x? This is by design? Why? Is this a bug in Yaesu's firmware? Where is this frequency coming from?
Mike On Tue, Nov 27, 2018 at 5:19 PM Mike Saeger <m...@thesaegers.com> wrote: > My FTDX3000 works fine on FT8 on all bands except 60 meters. > The FTDX3000 has preset channels. The channel in memory 3 is preset to > 5.358.500. When I turn on Enable TX I can send one transmission. When the > transmission is over, WSJT-X tries to set my VFO to 5.358.308. > I don't know where this frequency is coming from because I manually added > 5.358500 to the Frequency tab. > > The FTDX3000 will not transmit on this frequency. I have to push the > MCH/GRP button, then the V/M button to get back to 5.358.500. The next > transmission the same thing happens. When transmit is finished, WSJTX sets > the VFO back to 5.358.308 > and transmit is locked out again. > > I have the Split operation set to NONE. I also tried Fake-It but that had > the same result. > > I was able to make a contact by setting the Rig to NONE in the Radio tab > and operate the PTT manually, but that is NOT a good option. > > What settings do I need to get it to work correctly? >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
