The contest went great. I won't rehash old issues other than to say I use tab 2 and would like to see it stay with the fix for sent exchange (and a sticky RR73 response). The colors were great and helped limit the dupes. I especially like the "gold" color for needed zones.
1. This is the first time I have used the "go up 2 KHz" to avoid congestion tactic. I really wish that this would be implemented in normal operation since its frequently impossible to find a space to play on 40 and 20. The issue I have with the "2 KHz" jumps are that the bottom 1 KHz of the waterfall is useless since those decodes are usually from the previous lower band segment. While WSJT-X decodes them fine the operators are listening to the calls on the lower segment (higher tones) and when I call them on the higher segment (lower tones) I am not decoded for them. In normal operation the segment is useable from well below 500 to well above 2500. Wouldn't it make sense to make the segment jumps to 3 KHz to give the operators a clean segment to work with? 2. I have random issues when I change transmit frequency where the transmitter keys but there is no audio. This is either happening when I shift click on the waterfall or when I manually type the desired frequency into the TX selection window. The problem is fixed by quickly hitting Halt TX then Enable TX. I have found the need to keep my rig's xmit monitor on to let me know when this happens. This problem occurs in both the Mac version 1.9.1 and Windows RC5. I've seen this mentioned by others but I can't seem to find the known problem list to see if it is there. 3. Does anyone have any good responses to tell the XYL when she thinks I am crazy to be staring at a computer screen and listening to beeping for 24 straight hours??? Thanks to the development team for an EXCELLENT piece of software! Bill - AK6A
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel