Program version - wsjt-x v1.9.0-rc4 Operating system - linux - Debian GNU/Linux 8 (jessie) 64-bit
System - 2G ram, 1.66GHz (dual), SSD HD 240G (acer aspire one) Radio - TS2000 with SignaLink USB (Through ACC port) Concise description of the problem - It seems that wsjt-x is unable to decode FT8, especially signals with high amplitude. When I first had the system running, I was able to decode all signals (in fact I was very impressed). Now, after about a week, it has stopped decoding properly. I am using NTS time utility and the clock seems to be spot on, certainly within 2 seconds. I have changed the audio level out of the SignaLink from 10 to 80 (on wsjtx - it was running well at about 30 to 50) with no change. I have also tried adjusting the audio level out of the TS2000 (menu 50C) again with no change. Exact sequence of steps required to reproduce the problem - Problem has been persistent for 2 days now. If I see a signal calling CQ (usually a weaker signal), then I can work them. If I call CQ and I see a station attempting to reply, then I likely will not see the decode. Just monitoring I will see several signals on the waterfall (lets say 5), but only a few will decode (lets say 1). it seems to be louder signals that are affected. - NS0V
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
