same points here abt microphone audio slider. no middle term. de Enrique PY2CP
Em ter, 30 de abr de 2019 às 15:48, Gary Kohtala - K7EK via wsjt-devel < [email protected]> escreveu: > > I have discovered that the receive audio level in FT4 is much more > sensitive than the other modes. I had initially kept my receiver > audio at the same level as I had been using for FT8 but quickly > discovered that it was too high, causing many cycles of no decode. > Dropping the receive audio down to a much lower level seemed to > improve the decode rate rather significantly. This may or may not > be the case with the systems in use at other stations but I thought > I would report my finding as it might assist others just coming onto > FT4. > > I also found that upon execution of FT4, my microphone audio slider > in Windows went from +0.4 db to +30 db, or maxed out. The only way > to get the receive audio input correct was to go back into the > Windows Audio panel and manually set it as close to 0.0 db as possible. > Has anyone else encountered this? > > So far I have thoroughly enjoyed the new FT4 mode. Thus far I have been > using it > in the S/P mode, not RTTY RU mode. Thus far I have bagged almost two > dozen contacts in record time. Much faster than any of the other JT modes. > Thank you, developers! As long as there is FT4 activity I feel that > I will adopt this new mode for general use, not particularly for RTTY > contest use. I hope that a large portion of the FT8 crowd follows me > over to FT4 because it is MUCH faster. I love it! > > Best regards, > > Gary, K7EK > > Radcliff, KY (EM77at) > > > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
