I had the same issue once - invalid QSO date. Filled in the one missing data box - left side - and logged ok. Quit and restarted app with no further issues.
Logged over 40 QSOs when I was on and off the rig. Kudos development team . Frank Regards and 73s VE3FBZ London Amateur Radio Club 100 years old in 2020 www.larc.ca > On Jun 4, 2019, at 21:38, Palle Preben-Hansen, OZ1RH <pa...@oz1rh.com> wrote: > > Same problem here, after the first 2-3 QSO's were logged the small error > logging window from WSJT-X popped up with an error about invalid QSO data as > my send rpt+exchange did not appear in the QSO data to be saved. Almost every > QSO thereafter I had to enter my send report and state/serial nr to log the > QSO. A few times the received rpr+exchange was not in the log window either. > Also the 'Enable TX' got unselected so I missed several periods as I had to > enter my send data and pres 'Enable TX'. > > FT4 RTTY RU, Win 10, -rc7 64 bit on Huawei Matebook 13.9 Pro, I7 quad+16 GB > RAM. > > 73, Palle, OZ1RH > > ------------------------------ > > Message: 2 > Date: Tue, 4 Jun 2019 19:52:02 -0400 > From: "K2DBK-WSJT" <k2dbk+w...@k2dbk.com> > To: "'WSJT software development'" <wsjt-devel@lists.sourceforge.net> > Subject: [wsjt-devel] "Invalid QSO Data" when trying to log during > mock contest - RC7 > Message-ID: <015a01d51b30$82196460$864c2d20$@k2dbk.com> > Content-Type: text/plain; charset="us-ascii" > > I was making a few contacts in the mock contest this afternoon and ran in a > problem where to an issue where the QSO completed but when I tried to log it > a dialog popped up that said "Invalid QSO Data Check exchange sent and > received". I've attached a screenshot of what was going on at the time. The > Rpt Sent & Rcvd fields were initially populated corrected but are blank now > as I think this was my 2nd or 3rd attempt to fill in and log. To finally get > it to log I hit Cancel on the logging window then clicked on Log QSO, filled > in the same information as before, and it went through. > > This happened a second time in the exact same way, and one thing that I > noticed that was the same (although unfortunately I don't have a screenshot) > is that there was another signal decoded in the Rx Frequency window between > my report to the other station and his RR73 to me. I don't know if that's > related but I wanted to mention it. > > I do have Save All decodes checked so I can provide those if it will help. > I'll continue to see if I can see this again. This is on Window 10 Pro > 64-bit running the 64-bit version of WSJT-X. > > -------------- next part -------------- > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel