I just checked my computer soundcard settings and followed your procedure to set up the radio, the computer and the tranceiver, resulting in a seemingly dramatic enhancement of operation efficiency. For one thing (operator error, no doubt), I've never checked that the sound card sample rate was 48kHz 16-bit before, and of course it was not. Thanks a lot!
73 de Tom OH6VDA Sendt fra min iPad Air 2 > 5. jun. 2019 kl. 15:01 skrev Black Michael via wsjt-devel > <wsjt-devel@lists.sourceforge.net>: > > For the IC-7300 you want the ALC meter to show no action at all. So if it > ever bumps up at all you've got too much audio going into the rig and need to > back off the USB Mod Level. > > You should be able to transmit 100W with no ALC (or very close to 100W). > > That is the goal of all rigs....some of the newer rigs will show < 0dB ALC > (e.g. K3) though so it pays to learn what your ALC meter is really telling > you. The way you do that is set your rig for 100W, WSJT-X power slider at > -3dB, computer audio out at 0dB, then adjust rig/external sound to show 50W > tranmit power going out. That should be 0dB ALC and shows you what to expect > when transmitting close to the 100W. Many rigs cannot do 100W with no ALC so > have to back off to 95W maximum or such. So as you gradually increase the > power slider in WSJT-X (use the up cursor key) watch your ALC as you approach > 100W. If you start seeing ALC you have to back off the audio level at the > rig or external sound card so the WSJT-X slider can be at 0dB and no ALC > showing. > > de Mike W9MDB > > > > > On Tuesday, June 4, 2019, 12:06:34 PM CDT, Black Michael via wsjt-devel > <wsjt-devel@lists.sourceforge.net> wrote: > > > If you reduce power from WSJT-X (not from the rig) does your ALC drop? If > so...that's too much audio. > > Mike > > > > > On Tuesday, June 4, 2019, 11:57:44 AM CDT, Gene Marsh <w8...@me.com> wrote: > > > Mike, > > My ALC is ~25% @80W. But, I have no issues with transmit. Only observing > the double decode. Everything else is good. > > 73 de W8NET Miles / “Gene” > Secretary, Portage County Amateur Radio Service (PCARS) > 3905 Century Club - Master #47 > DV2/W8NET in the Philippines > Licensed since 1974 > >> On Jun 4, 2019, at 12:46 PM, Black Michael <mdblac...@yahoo.com> wrote: >> >> I do believe 63% audio on the IC7300 is wayyyyyy too much audio. What does >> your ALC meter say? >> >> de Mike W9MDB >> >> >> >> >> On Tuesday, June 4, 2019, 11:44:04 AM CDT, Gene Marsh via wsjt-devel >> <wsjt-devel@lists.sourceforge.net> wrote: >> >> >> Joe, >> >> My setup: >> >> Windows 10 Pro - see the pic: >> >> <image1.jpeg> >> >> >> -rc7 >> IC-7300 >> USB audio codec @66% volume >> >> Need more info? >> >> I will try to save a wav file next time I see it. >> >> >> 73 de W8NET Miles / “Gene” >> Secretary, Portage County Amateur Radio Service (PCARS) >> 3905 Century Club - Master #47 >> DV2/W8NET in the Philippines >> Licensed since 1974 >> >>> On Jun 4, 2019, at 12:12 PM, Joe Taylor <j...@princeton.edu> wrote: >>> >> >>> Hi Gene, >>> >>> I have seen nothing like the duplicate decodes you report. Please send us >>> the .wav file for one or two of your examples, and tell us something about >>> your computer setup. >>> >>> -- 73, Joe, K1JT >>> >>>> On 6/4/2019 11:39, Gene Marsh via wsjt-devel wrote: >>>> FT4: I have seen 7-8 times, double decoding. Always a strong signal. >>>> Example: >>>> image1.png >>>> I saw that in the early days of FT8. >>>> Except for that, it’s working really well. (Thank you Joe and your team) >>>> 73 de W8NET Miles / “Gene” >>>> Secretary, Portage County Amateur Radio Service (PCARS) >>>> 3905 Century Club - Master #47 >>>> DV2/W8NET in the Philippines >>>> Licensed since 1974 >>>> _______________________________________________ >>>> wsjt-devel mailing list >>>> wsjt-devel@lists.sourceforge.net >>>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >>> >>> >>> _______________________________________________ >>> wsjt-devel mailing list >>> wsjt-devel@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> >> _______________________________________________ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> >> <image1.jpeg> > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
