Hi Sergio,
I’m not quite sure what you are suggesting. The issue is really just a cosmetic
problem with the appearance, everything works OK otherwise.
--
73,
David, K2DBK
http://k2dbk.com
twitter: @k2dbk
From: Sergio Yes UT9LI <[email protected]>
Sent: Saturday, June 29, 2019 6:00 AM
To: WSJT software development <[email protected]>
Subject: [wsjt-devel] dT
Setting the dT parameter obviously gives results: in Log ((call)) have dT close
to the level ((0)). The problem disappears !?
29 июня 2019, 01:09:42, от K2DBK-WSJT <[email protected]
<mailto:[email protected]> >:
I’m trying to help out a less computer-savvy friend of mine with an issue with
how the main windows displays with v2.0.1 (not 2.1 rc7). I’m trying to get some
additional information about his hardware, but I he’s believe using a laptop
with 4K screen resolution using Windows 10. In order to have things not display
in a microscopic size, his icon and app display settings were initially
adjusted for a scale factor of 250% (which is recommended). Other applications
seem to display correctly. I’ve made some adjustments to the scale factor and
adjusted the font size in the application, so most things are OK. However, if
you look at the screenshot you’ll see that the column heads at the top as well
as the meter at the lower-left are cut off. Prior to the adjustment, the dB
meter slowed only a tiny slice on the left hand edge of the green bar and only
a single digit of the indicated strength as it was cut off.
I’m looking for some guidance as to how to adjust the combination of in-app
font settings along with anything that I can adjust in Windows to get this to
look as it should.
_______________________________________________
wsjt-devel mailing list
[email protected] <mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
--
Good Luck! Best DX's! 73!
de Sergio fm Kharkov BYE-Poka!
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
