Uwe, Remember that for FT8 WSJT-X records a WAV file for 13 seconds then decodes it. If you switch bands in the middle of the receive cycle, you will record a mix of stations from both bands into the WAV file. When it is decoded, you will see a mix of decodes from both bands which you can't rely on being accurate.
If you use the "Blank lines between decode period" option,disregard the data below the separating dashed line which does NOT show the band on the right side of the line. That's just the way it is, nothing to be concerned about. 73, Rich - K1HTV From: "DG2YCB, Uwe" <[email protected]> To: <[email protected]> Cc: Bcc: Date: Thu, 20 Feb 2020 11:19:51 +0100 Subject: [wsjt-devel] Band change @ wsjt-x: decodes of old cycle falsely detected/reported as from new band Hi Joe, Steve, Bill et al., I don't know if it's already known: At WSJT-X v2.1.2 0068f9 after changing the band, remaining decodes of the old cycle are still falsely detected as from the new band. And likely, these decodes are then also reported to PSK Reporter or HamSpots for the wrong band. Would be great if that will be corrected in one of the future releases. 73 de Uwe, DG2YCB
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
