Hi, thanks one more time for all the dedicated work with yet another big step forward in decoding weal signals . !
Let me report that I am no longer able to CAT control my SparkSDR with the "Hamlib NET rigctl" network server. My settings are : "localhost:51111" for Network server, which should connect to my first (out of four) virtual transceiver in SparkSDR (which is connected to a Hermes Lite II). Substituting "localhost" with its IP address or hostname does not solve the problem neither. The same settings work fine with WSJT-X 2.1.2. Some more observations : - The "C:\WSJT\wsjtx\bin>rigctl-wsjtx -m 2 -r localhost:51111 F 7253500 M LSB 0" command correctly sets the VFO and mode. - Overwriting the 3 rigctl executables with the release 2.1.2 binaries yields the same result (sorry but I could not withstand doing this .). This is on a windows 10 - 64 bit config. 73's and best regards, Erik ON4PB _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
