Hello, Id like to bring an item to your attention, in case you are not aware.
While recently using WSJTX 2.2.2 and prior, for WSPR reporting along with an SDR Play RSP2, I had setup band hopping and one day noticed an exceptional and unusually high spot count on 30m (very optimistic numbers for my QTH and for anyone close by. I had found that the controlling VRX of the SDR was not set to a wide enough bandwidth and when WSJT hopped tot 30m, the frequency for the SDR Play did not change and stayed on 20m. As a result, it uploaded all of my 20m spots as 30 m spots. Today I noticed the same phenomenon happed to WD4ELG. BY 8am he had accumulated over 325 40m spots which is at best, highly optimistic as the best spotter of the world had only reported just over 170. This again happened with his 30m spots number a few hours later. Obviously this presents significantly skewed data to WSPR.net and other reporting channels. Possible solution: I noticed that the frequency display window of WSJT changes color when it does not match the receivers (or rig) frequency. Is it possible to have this color change indication of WSJT frequency display window ( or some other indication of frequency band mismatch) disable WSPR spots from uploading ? It would make sense that this be hard coded and not a selectable option. Thank you Tom WA2TP
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
