Hello Bill,
0 dBm is far too much for me and some others. The old WSPR versions go down to - 30 dBm On LF and ELF not the transmitting power but the radiated power (ERP) is entered and especially on ELF ERP powers below 0 dBm are more common than higher powers ;i) 73 Joe Von: Bill Somerville [mailto:[email protected]] Gesendet: Dienstag, 6. Oktober 2020 13:57 An: [email protected] Betreff: Re: [wsjt-devel] TX Power level On 06/10/2020 11:54, Joe wrote: Hi Group, during tests with FST4W and very low power ( 25µW) I noticed that power < 1 mW cannot be set in the GUI. That was different in the past. I just checked, even in WSPR-X, you could set the power down to - 30 dBm. This should be taken into account in a final version. 73 Joe DF2JP Hi Joe, the range of power levels in the FST4W message are the same as for WSPR, that is 0 dBm through 60 dBm in steps of 3 ⅓ dB (the numbers shown in the user interface are rounded to whole dBm). 73 Bill G4WJS. -- Diese E-Mail wurde von AVG auf Viren geprüft. http://www.avg.com
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
