Despite I was confident that by using a "rolling distribution" like Tumbleweed is, the frequent packages updates before or after could get to break some functionalities of the system,
I've always been able to make the necessary little adjusts and corrections which have resolved the malfunctions I faced so far.
But today I stuck on the apparent impossibility to make the WSJT-X/CQRLOG work as usual by using the net hamlib rigctl and starting WSJT-X by the CQRLOG control command.
Currently I only succeed to make WSJT-X working by hand launching the following command:
/usr/bin/rigctld -m 1021 --vfo -r /dev/ttyUSB1 -p /dev/ttyUSB0 -t 4532 -s 4800 --set-conf=data_bits=8, stop_bits=2, serial_parity=None, serial_handshake=None, dtr_state=OFF, rts_state=ON
Then I
start WSJT-X by the Start Menu using the radio setting to use my
RTX (Yaesu FT-100) since hamlib option does not work anymore, and
everything is working, CAT and PTT which are on separate
USB-to-Serial ports.
Despite it works I see an error message that I would like to share with this list to see if somebody has already faced this error before:
---
73 de Marco, PY1ZRJ (former IK5BCU)
![]()
Despite it works I see an error message that I would like to share with this list to see if somebody has already faced this error before:
Hamlib: rig_init: rig does not have rx_range!!Thanks for your kind attention and for any eventual hints.
---
73 de Marco, PY1ZRJ (former IK5BCU)
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
