On 03/02/2021 21:02, Edfel Rivera wrote:
Hi:
Please see attachment. Seems to be decoding or the functionality is
correct. Also, what TX power could be used? As TX intervals increase,
Could that cause damage to rig terminals? Thinking of JT65 where TX
power < ~30watts.
BTW, Thank you very much for INNOVATION. Seems like another fantastic
mode.
73'
Edfel
KP4AJ
Hi Edfel,
the lines in the Single-Period Decodes window without decodes indicate
the best, but not decodable, candidate signal within the current
frequency tolerance window. They may provide indication that a station
is transmitting.
As for Tx power, nothing new there, use whatever is needed to make the
QSO and not more. That could be 1500 W or 1 pW depending on the band,
path, and conditions. For EME and VHF weak signal modes like ionoscatter
a few hundred watts may be necessary. Like JT65 Q65 is 100% duty cycle
and the same considerations for PA current and temperature should be
observed as would be for any other 100% duty cycle mode like FM.
73
Bill
G4WJS.
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
