We have the same transceiver Mike, ANAN100D. Please try it. because I am puzzled.
73, Ton PA0TBR On Sun, 18 Apr 2021 at 00:21, Black Michael <[email protected]> wrote: > You never did say what rig you have. > > I've got an ANAN100D and 7000DLE MKII maybe I can reproduce this problem > and see if there's a fix. > I'm using Thetis 2.8.11 but can compiler it too. > > Mike W9MDB > > > > > On Saturday, April 17, 2021, 05:09:16 PM CDT, Ton PA0TBR <[email protected]> > wrote: > > > Hi Mike, > > I monitored the CAT messages, all messages behave as expected, when I > transmit using instance 1, VFO 2 (on port 2) is not given a new frequency > (FA<freq>) command and replies to the FA queries continue to give the same > frequency for VFO2, while WSJT-X instance 2 shows a different frequency. > The checks were done with the TS2000 selection for CAT. > > Questions: > 1) Do you agree that it is easier to set the Thetis Transmit & Receive > Filters to something like 0 - 5000 Hz and set WSJT-X Split operation to > None? > 2) Can you see the problem on your system? > 3) I assume that the UDP settings I described in my initial message are > correct? Could it be UDP between the 2 WSJT-X instances? > > 73, > Ton PA0TBR > > > On Thu, 15 Apr 2021 at 23:07, Ton PA0TBR <[email protected]> wrote: > > Hi Mike, nice to hear from you! > > I will check the CAT communication, you might have a point there. > > Maybe it's easier to set the Thetis Transmit & Receive Filters to > something like 0 - 5000 Hz and WSJT-X Split operation to None? > > The answers to your questions > 1) I use the 2 instances to monitor different bands, different frequency > segments in one band, different modes etc. > > 2) Rig selection is TS2000, I am using this setup for many years and > obvious overlooked the new rig selections. > I didn't expect CAT control to play a role in this because only the > instance of WSJT-X is playing tricks and manual band / frequency changes > initiated on either instance or VFO work as expected. > I changed to PowerSDR/Thetis, but see no difference. > What changes were made in the PowerSDR/Thetis selection? Did you implement > something like I did in Thetis, as below? > > 3) CAT control has been working fine for me. It includes a small mod where > the Thetis CAT port defines the instance and which VFO (A or B) to use. (I > use this since 2014, initially on PowerSDR). > > > To avoid any confusion, Hound mode is not necessary to see what I > described. > > 73, > Ton PA0TBR > > > > On Thu, 15 Apr 2021 at 14:40, Black Michael via wsjt-devel < > [email protected]> wrote: > > Couple of thoughts.... > > #1 Why are two instances being run? What's the use case? > #2 What rig selection are you using? Should be either Flex or PowerSDR. > #3 You might have more success running FLRig and connecting both WSJT-X > instances to the one FLRig...that way you end up with just 1 program > actually controlling the rig. Theres a PowerSDR rig selection in FLRig > that I contributed. > > Mike W9MDB > >
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
