Well…COM11 and 12 are in Device Manager and they go away when the cable to the 9700 is unplugged and return when it’s plugged in. But in checking their properties, the Information window of the Events tab says Device USB\VID_10C4&PID_EA60\IC-9700_12005130_B requires further installation. Gobbledygook to me. But I guess I’ll uninstall and reinstall the ICOM drivers, hook up the radio and try again. Why they were once fine and now aren’t is a mystery known only to W10. Ray
Sent from the all new AOL app for iOS On Tuesday, November 16, 2021, 2:29 PM, tom via wsjt-devel <[email protected]> wrote: Hi Using IC9700 with 2.5.2 with out any issue - I don’t recall seeing any hamlib fixes for 'open com port' being reported recently. That error suggests COM11 is no longer available - if using windows double check the device manager to make sure COM11 still exists. Double check it is not being used by any other applications. If using another OS I can't help with method of checking com port existence. Regards TomGM8MJV On 16 Nov 2021, at 17:12, crohtun via wsjt-devel <[email protected]> wrote: Please point me again to the hamlib files that supposedly fix this problem. Using the same IC 9700 settings that are fine for 2.4.0 and trying to get 2.5.2 to work with it, I get this message even before hitting the Test CAT button: Rig failure Hamlib error: IO errorport_open: serial_open(COM11) status=-6, err=No erroriofunc.c(81):port_open return(-6)rig.c(800):rig_open return(-6) while opening connection to rig RayKN2K_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
