Please place this file as described below https://www.dropbox.com/s/t52ngcalsgnpm8m/wsjtx_log_config.ini?dl=0
C:\Users\[username]\AppData\Local\WSJT-X The WSJT-X_Rigcontrol.log file will be in the same location For Linux put it in ~/.config The WSJT-X_Rigcontrol.log file will be here: ~/.local/share/WSJT-X Restart WSJT-X and duplicate the problem. Shut down WSJT-X Then send me the WSJT-X_RigControl.log file Mike W9MDB On Sunday, July 10, 2022 at 09:33:28 AM CDT, Nigel Haynes via wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote: I have been using the WSJT-X 2.6.0-rc1 without issue on several rigs, but when I tried to setup an FT-857 for rig control, I was having errors. I am using a signalink for sound, so need to select VOX in the settings. When selecting VOX, it gives an error when connecting via Test CAT. If I select CAT PTT, everything works (except it doesn’t because the rig wants audio via the mic and not the cat port on the rear where the signalink is sending the audio.) I installed the latest production release, 2.5.4, and everything is good. As a test, I have it working on 2.5.4, then installed WSJT-X 2.6.0-rc1 and launched the same shortcut, and get the error. I then reinstalled 2.5.4 and it works as expected. The rig also switches from VFOA to VFOB and back a few times before the error. Recap: WSJT-X 2.6.0-rc1 has an issue on the FT-857 rig control and will not connect when VOX PTT is selected. It connects (rig control) with CAT PTT, but need to use VOX. Thanks, Nigel Haynes supernigel.hay...@gmail.com _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
