Hello and thanks to the development's team for the new WSJT-X release!
Would like to inform that the little issue below I faced using RC2 is
not anymore present on RC4!
Best regards!
---
*73 de Marco, PY1ZRJ (former IK5BCU)*
**
Il 22/07/22 11:14, Marco Calistri via wsjt-devel ha scritto:
Hello,
I noticed a new undesired behavior here using the new WSJT-X 2.6.0-RC
2 with the latest Hamlib available by Github:
When I switch *FROM* any band *TO* 21MHz band, the rig begins making a
sort of band switching from previous band to the 21MHz one, without stop.
This happens *ONLY* when I switch over 21MHz and the only way to stop
it is by manual pressing the SPLIT and the VFO A=B on my Yaesu FT-100
front panel.
I start rigctld with the command /usr/local/bin/rgctld and the
additional parameters I pass to it are:
/usr/local/bin/rigctld -m 1 *-r /dev/FT-100_USB1 -t 4532 -m 1021 --vfo
--set-conf=post_write_delay=40 -s 4800*
This is the first time so far I see this behavior which I consider of
very low severity, BTW I would like to share it here.
Regards,
---
*73 de Marco, PY1ZRJ (former IK5BCU)*
**
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel