Thu, 13 Oct 2022 08:34:37 -0400 Dennis W1UE via wsjt-devel <wsjt-devel@lists.sourceforge.net> kirjoitti:
Problem2 in not a problem, hover mouse over text, you can see, that shoud wor with ARRL contest. jarmo, oh1mrr > I can also confirm problem #1. It is the same problem that existed in > version 2.6.0 RC1,2,3 and 4. > > Since I use WSJT in combination with N1MM+ for logging, I get a "TCP > Error" when the program closes. > If I'm not using the combo, WSJT just closes. I have not noticed > that the closing occurs when using > only FT8; it may also occur when using FT4, but there isn't enough > activity on FT4 to see if it happens. > > A couple of additional observations: > 1. At the suggestion of K1JT, I replaced the Hamlib dll of 2.6.0rc4 > with the same dll from 2.5.4. The closing > seemed to stop. This only works if your rig is supported by the > earlier dll. > 2. A fresh install of 2.6.0rc4 will enable 20+ hours of operation > before it closes. Once it starts closing, it will > continually do it. > > I have not seen the issues with "CQ MAX DIST". Are you sure it's not > picking the correct call? > 1. Calls without a grid are never selected unless they are the only > reply to your CQ. > 2. Band/Mode dupes are given a score of zero and only selected if the > only caller. > 3. Call selection is based on the point score generated by the program > calculations; I know SP is further than > DL, but if they have the same point total and the DL is before the SP > in the decode window, the WSJT will > select the DL station to call. > > Dennis W1UE > > > On Thu, Oct 13, 2022 at 8:21 AM jan0--- via wsjt-devel < > wsjt-devel@lists.sourceforge.net> wrote: > > > I can confirm problem 1, as it happened to me less than an hour ago, > > including the orphaned JT9 decoding application. Running Win 10 on > > a Lenovo X1 Carbon laptop. I had been on FT8 for about an hour > > when it happened. > > > > > > > > Ed N4II. > > > > > > > > *From:* Frode Igland via wsjt-devel > > <wsjt-devel@lists.sourceforge.net> *Sent:* Thursday, October 13, > > 2022 5:06 AM *To:* WSJT software development > > <wsjt-devel@lists.sourceforge.net> *Cc:* Frode Igland > > <frodeigla...@gmail.com> *Subject:* [wsjt-devel] WSJT-X 2.6.0-rc4: > > Sudden shut-down, "CQ: Max Dist" doesn't work, "CQ: None" stops > > working > > > > > > > > I have used -rc4 since it was released and have found it quite > > stable with three notable exceptions: > > > > > > > > *1. Sudden closing in FT8 after extended periods of operation* > > > > After an extended period of use in FT8 mode (normally more than two > > hours), WSJT-X may close down abruptly. The closing happens at the > > start of an FT8 sequence. I have never experienced closing on FT4, > > but then I have very rarely worked FT4 for extended periods. To > > start again, an orphaned JT9 decoding application first has to be > > terminated in the Task Manager. This issue started with WSJT-X > > 2.6.0-rc1 and still happens. > > > > > > > > *2. "CQ: Max Dist" doesn't work* > > > > After selecting "CQ: Max Dist", WSJT-X still selects the station > > first decoded, notwithstanding the distance. It makes no difference > > whether "CQ: Max Dist" is selected after "CQ: None" or "CQ: First" > > or if "CQ: Max Dist" was selected on start-up before first CQ. > > > > > > > > *3. "CQ: None" stops working after a while* > > > > I often call CQ DX with the "CQ: None" setting, to be able to > > select which DX station to work. This normally works well, but > > suddenly WSJT-X may start answering the first station decoded > > automatically, without being selected manually by me. Sometimes, > > reselecting "CQ: None" helps, and sometimes I have to close and > > reopen WSJT-X and select "CQ: None" before calling CQ. > > > > > > > > These are my experiences with WSJT-X 2.6.0-rc4. > > > > > > > > 73, Frode LA6VQ > > > > > > > > > > _______________________________________________ > > wsjt-devel mailing list > > wsjt-devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
