The desired operation would be that the TX watchdog setting is also used for Hound mode.
73, Ton PA0TBR On Tue, 17 Jan 2023 at 20:37, Laurie, VK3AMA via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > Running v2.6.0 in my tests. The defect also confirmed by a JTAlert test > team member running v2.6.1 > > Testing here with a WD time of 4 minutes, which I know is much longer that > the hard-coded Hound WD time, When in Hound mode and the WD is triggered > and Tx is disabled there is no UDP status for the WD triggered sent. The WD > count down in the bottom right of the WSJTX window continues to count down > after TX has stopped but when it reaches 0 the WD UDP Status is not sent > which to me seems correct as WSJTX was not TX enabled at the time because > of the earlier disabling of TX by the Hound mode WD triggering. > > Looks to me like there are at least 2 WD timers in the WSJTX code. One for > normal operation that uses the user-settable the WD time setting, The > second WD timer is when in Hound mode and this is a hard-coded value and > does not appear to be setting the UDP Status TX Watchdog flag when the WD > is triggered. > > de Laurie VK3AMA > (JTAlert author) > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel