Please, folks, no more email about "Split".
Multiple messages on the same topic by the same few individuals are
seldom helpful -- and in my view most certainly have not been, in this
instance.
Regarding terminology used in the WSJT-X user interface: English and
most other modern languages often use the same work to mean somewhat
different things in different contexts. In the present case, "Split
Operation" is clearly defined when first used in the WSJT-X User Guide.
Here's the full entry, quoted from near the end of Section 4.2:
"Split Operation: Significant advantages result from using Split mode
(separate VFOs for Rx and Tx) if your radio supports it. If it does not,
WSJT-X can emulate such behavior. Either method will result in a cleaner
transmitted signal, by keeping the Tx audio always in the range 1500 to
2000 Hz so that audio harmonics cannot pass through the Tx sideband
filter. Select Rig to use the radio’s Split mode, or Fake It to have
WSJT-X adjust the VFO frequency as needed, when T/R switching occurs.
Choose None if you do not wish to use split operation."
-- 73, Joe, K1JT
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
