Hi Kari, It's installed on both systems.
Some more evidence: I can run aplay and output to the fig's sound output device without error. However, if I run wsjtx with the audio output set to the hdmi device, when I run aplay, I get the same "no such device" error. I don't this is a wsjtx issue, rather a problem in pipewire. I'll look. I'm especially suspicious of the rig's long device name. Steve WA9OLA On Sat, 2024-06-29 at 22:27 +0300, Kari Sillanmäki via wsjt-devel wrote: > Hi Steve, > > Do you have "libqt5multimedia5-plugins" installed? > > 73's de Kari, oh2gqc > > On 6/29/24 22:04, Steve Brown via wsjt-devel wrote: > > Hi, > > > > No problem on Ubuntu 24.04 on an amd64, but no audio on RPi 5 with > > the > > same OS. Receive works on both. > > > > I rebuilt wsjtx so the images are identical on both (2b9d65). > > > > The settings are identical. > > > > The sound output name is > > "alsa_output.usb-C-Media_Electronics_Inc._USB_Audio_Device- > > 00.analog- > > stereo" > > > > The log is spammed with > > > > Jun 28 14:48:00 wsjtx kernel: retire_capture_urb: 1014 callbacks > > suppressed > > Jun 28 14:48:01 wsjtx pipewire[1007]: spa.alsa: hw:2: > > snd_pcm_status error: No such device > > Jun 28 14:48:01 wsjtx pipewire[1007]: spa.alsa: hw:2: > > snd_pcm_recover error: No such device > > Jun 28 14:48:01 wsjtx pipewire[1007]: spa.alsa: get_status error > > Jun 28 14:48:01 wsjtx pipewire[1007]: spa.alsa: hw:2: snd_pcm_drop > > No such device > > Jun 28 14:48:01 wsjtx pipewire[1007]: spa.alsa: hw:2: close failed: > > No such device > > Jun 28 14:48:01 wsjtx pipewire[1007]: spa.alsa: front:2: > > snd_pcm_drop No such device > > Jun 28 14:48:01 wsjtx pipewire[1007]: spa.alsa: front:2: close > > failed: No such device > > Jun 28 14:48:01 wsjtx kernel: usb 1-2.2: reset full-speed USB > > device number 4 using xhci-hcd > > Jun 28 14:48:03 wsjtx pipewire[1007]: spa.alsa: front:2: > > snd_pcm_drop No such device > > Jun 28 14:48:03 wsjtx pipewire[1007]: spa.alsa: front:2: close > > failed: No such device > > Jun 28 14:48:03 wsjtx kernel: usb 1-2.2: reset full-speed USB > > device number 4 using xhci-hcd > > Jun 28 14:48:05 wsjtx pipewire[1007]: spa.alsa: front:2: > > snd_pcm_drop No such device > > Jun 28 14:48:05 wsjtx pipewire[1007]: spa.alsa: front:2: close > > failed: No such device > > Jun 28 14:48:05 wsjtx kernel: usb 1-2.2: reset full-speed USB > > device number 4 using xhci-hcd > > > > If I set wsjtx audio output to the hdmi audio device, I get FT8 > > tones > > and no complaints in the log. > > > > The rig indicates transmit, but no audio, so no RF. > > > > Any suggestions on tracking this down? > > > > I tried uncommenting some of the qDebug calls, but can't > > find/enable > > the output. > > > > Steve WA9OLA > > > > > > > > > > _______________________________________________ > > wsjt-devel mailing list > > wsjt-devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
