Hi All, The following Subprocess Error (see below) was observed while running rc7 and is repeatable. It is not observed in rc6.
The following actions were taken to trigger the error. 1. Launch WSJT-X 2.7.0-rc7 2. Set to Super Hound mode. 3. Set the Tx DF to a DF greater than 1450 Hz by either shift left click in the waterfall or by typing a value in the Tx box. 4. Set the Rx frequency to Tx frequency by clicking the down arrow button to the right of the F Tol box. This is not a valid configuration if the Rx frequency needs to be at or near 750 Hz. The SW is not handling the error gracefully or the functionality to set the Rx to the TX needs to be disabled. Let me know if additional info is needed. Scott AA5AM Subprocess Error Subprocess failed with exit code 2 Running: C:\RADIO\WSJT2.7.0_rc7\bin\jt9 -s "WSJT-X - IC756P2" -w 1 -m 1 -e C:\RADIO\WSJT2.7.0_rc7\bin -a "C:\Users\computer\AppData\Local\WSJT-X - IC756P2" -t "C:\Users\computer\AppData\Local\Temp\WSJT-X - IC756P2" At line 48 of file C:\JTSDK64-Tools\WSJTX\BBdevelop\lib\superfox\sfox_remove_tone.f90 Fortran runtime error: Index '48345' of dimension 1 of array 's' outside of expected range (45000:1) Error termination. Backtrace: Could not print backtrace: libbacktrace could not find executable to open #0 0xffffffff #1 0xffffffff #2 0xffffffff #3 0xffffffff #4 0xffffffff #5 0xffffffff #6 0xffffffff #7 0xffffffff #8 0xffffffff #9 0xffffffff #10 0xffffffff #11 0xffffffff #12 0xffffffff #13 0xffffffff
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
