Rig split is a bit clunky on older Icom rigs as they have no concept of setting
VFOB freq and mode. You have to swap things around which is clunky.That's one
reason Fake It was created as it behaves better for rigs like that.
Newer Icom rigs have the 0x25 and 0x26 commands for setting the "other" VFO --
still no concept of A/B but works in Rig Split much better.
Mike W9MDB
On Tuesday, October 8, 2024 at 08:22:54 AM CDT, Charles Suckling
<[email protected]> wrote:
IC735 - at least I have always needed to use fake-it
Charlie
On Tue, 8 Oct 2024 at 15:20, Black Michael <[email protected]> wrote:
What rig doesn't support VFOB?
Mike W9MDB
On Tuesday, October 8, 2024 at 06:31:19 AM CDT, Charles Suckling via wsjt-devel
<[email protected]> wrote:
Hi John
Yes, I tested Matt's patch with split = fake it, as my rig doesn't support CAT
control of VFO-B.
Charlie
On Tue, 8 Oct 2024 at 12:22, John Nelson via wsjt-devel
<[email protected]> wrote:
> Hi Matt,
>
> But what happens if after normal FT8 operation using Split-Rig instead of
> Split-Fake, then when the switch to SuperFox is made, this will leave the
> rig with VFOB active and transmit frequency will not be 28.091 but 28.090.
>
> The patch works for Split-Fake nicely. But it seems the problem with
> Split-Rig remains…Am I correct?
>
> — John G4KLA_______________________________________________
> wsjt-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
