Menu 017 is TX Out Level. Data Mic Gain is 077 and is currently set at 50. I'm using a SignalLink USB. The pwr slider on the far right as example if I bring it down to -35db brings my power out to 15 Watts. So I'm under the assumption my problem is solved. Thank you! It's been a few months since I used it.
> On 01/25/2025 9:32 PM EST Reino Talarmo via wsjt-devel > <wsjt-devel@lists.sourceforge.net> wrote: > > > > Frank, > > Clearly your audio settings require some tuning; there is now an excessive > level. Is it a typo, when you refer to menu 017 as that is for Voice memory; > the data MIC gain is menu 077? > > What happens when you use wsjt-x Pwr slider on the right hand? Does it start > to lower output power at some value. It should as the control range is 40 dB > or so. > > How is your audio connected between PC and FTdx1200. Are you using SCU-17? > > > > 73, Reino OH3mA > > > > From: FRANCIS PIETLOCK SR. via wsjt-devel <wsjt-devel@lists.sourceforge.net> > Sent: Sunday, January 26, 2025 12:23 AM > To: wsjt-devel@lists.sourceforge.net > Cc: FRANCIS PIETLOCK SR. <mvpfr...@comcast.net> > Subject: [wsjt-devel] Power Out Issue > > > > I'm running WSIT-X 2,7,0 RC1 on a Yaesu FT dx 1200. > > > > I can't seem to get my output lower than 100 watts out on FT8 > > Menu 017 reads 57 now. I've lowered it 20 digits & increased it 20 without > any changes. > > FYI.. I only use this rig for FT8 and haven't used it in a while and don't > recall how to do it. > > > > Frank WA1UYM > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
