I will start with all that. Thanks. Time will pass for a while... :)
--73, Glenn, AF8C
On 11/22/2025 6:48 PM, George Baltz via wsjt-devel wrote:
You can see the live text commands, but only mixed in with lots of other
debugging stuff; with WSJT-X improved, you turn on rig control
debugging. The commands sent to the TS-590S/SG are those in the PC
CONTROL COMMAND Reference Guide[https://www.kenwood.com/i/products/info/
amateur/pdf/ts590_g_pc_command_en_rev3.pdf]. The pseudo-commands that
Hamlib uses internally are (sorta) listed in the man pages for rigctl/
rigctld. If you want all the rig commands for all 317 rigs Hamlib
supports, I'm afraid the only single source for those is to download the
Hamlib source and browse the code.
Be happy to help you narrow down your search.
73 n3gb (hamlib developer)
On 11/22/25 10:11 AM, Glenn Williams via wsjt-devel wrote:
It's time for dumb questions here. I have never needed to peek inside
Hamlib for using my Kenwood TS590SG here. Everything has operated
well. But I would like to be able to see all the commands that Hamlib
has for all the rigs, including things like all the USB port text
strings sent to the rig for a TS590SG, or similar for rigs like K3
and K4, and what is used in "English" for older rigs using Signalink
interfaces, etc. The WSJT-X 3.0.0 User Guide only says Hamlib is a
DLL which will not reveal the list of human readable commands for
each type of rig (True/False?).
--Glenn, AF8C
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
--
This email has been checked for viruses by Avast antivirus software.
www.avast.com
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
