Bug report information:
* Program version: WSJT-X v3.0.0-rc1
* Operating system: Windows 11 Pro, Version 25H2
* Concise description of the problem: see below
* Exact sequence of steps required to reproduce the problem: see below
I have noticed a mouse button right-click action causes an incorrect
INTERNAL TUNER response on the IC-7610 radio attached to the program
when using FT8.
My understanding is left-clicking the TUNE BUTTON on the WSJT-X FT8 GUI
should only cause the radio to enter a transmit condition at a power
level set from the File > Settings > Audio > Remember power settings by
band (with check mark in Tune feature). It should not change the radio's
INTERNAL TUNER status (either on or off).
However, what I witness is the ICOM transceiver will actually change the
radio's INTERNAL TUNER to the active state (assuming it was in the
INTERNAL TUNER inactive normally) as indicated by the IC-7610 front
panel LED indicator. The right-click action on the WSJT-X FT8 GUI should
not have any affect on the status of the IC-7610 front panel INTERNAL
TUNER status.
Additionally, the mouse button right-click action on the lower-half of
the WSJT-X FT8 GUI will also make this erroneous change on the ICOM
radio front panel. For example, by right-clicking on the WSJT-X GUI just
below the Auto Seq check box or elsewhere on the GUI.
Thank you for your attention to my concern since I use a remote tuner at
the base of my antenna and having the radio's internal tuner also become
active is a serious problem! Gene, K5PA_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
