>> I am using soundmodem with an old scanner to receive local APRS traffic. > > A receive-only setup.
That is correct. >> I use my radio as a tracker. > > A transmit-only setup for your car? Correct as well. >> Is there some >> other service which I should be using? Should I set the message to route >> through the local digi? > > More than likely, if I understand your two setups correctly (I may > not), Xastir thinks that you have a path to local RF via the > scanner/soundmodem interface. Any messages people send to you on > local RF will cause Xastir to try to respond on local RF, but you > have a receive-only setup there. Xastir is trying, but won't > succeed. I have the AX.25 interface set to not transmit. I can see the messages on findu.com it's just that they don't seem to be making it through. Thanks for your reply. I will try putting the local digi in the path. > If Xastir has an internet connection as well, it will still prefer > that local RF interface. One way to do it would be to bring up > another copy of Xastir that is ONLY on an internet interface, using > a different SSID. From that one you should be able to message > people because there is no RF interface attached to mess up the > routing. Make sure you've put in a callpass entry on that interface > as well. > _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
