Hi Jason,
Op 18-08-10 20:53, Jason KG4WSV schreef:
It shows itself as "/dev/ttyUSB0" on my box (ubuntu 10.06 netbook release).
However, I have a strange problem.
- When I use minicom to connect to my TNC2 using that USB device, all works
OK "device = /dev/ttyUSB0, setting = 9600/7/E/1"
You sure about that? 7 e 1? It's usually 8 n 1. (that's 7 data
bits, even parity, one stop bit and 8 data bits, no parity, one stop
bit respectively).
It is 7E1. If I configure 8N1, it is even worse.
It is all works OK in 7E1 in minicom and using the onboard serial port
on the other laptop.
I seriously suspect that 7e1 is wrong and you need 8n1.
Well, while doing some further experimenting, I managed to get it
working yesterday-evening .. by switching the TNC to KISS-mode. (and
reconfiguring the interface in Xastir too, of course).
I guess what happens is that this forces the serial port to 8N1 and this
seams to solve my problem. :-)
Hoeray!! :-)
-Jason
kg4wsv
Cheerio! Kr. Bonne.
_______________________________________________
Xastir mailing list
[email protected]
http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
