Max,

You will need to look into how the wpa_supplicant handles network connections. Its purpose is to only allow one active network connection. So if you are wireless and you plug in a ethernet cable, then it shuts down the wireless connection. I guess this is ment to help the novices not have any network issues but it drives people nuts. I am guessing that is what is happening here because you are "attaching" in a sense another network interface.

hope this helps

kw


On 11/14/13 9:57 PM , Max Harper wrote:

First of all, thanks to all who replied wil lots of helpful information. .
While it would have been nice to start out using the latest version, for now 
I'm forced to using 2.0.0 since that's the version 'apt-get' installs. I'm 
slowly exploring Linux and one day I'll be able to compile my own.
I tried to get AX25 running but as soon as I ran "sudo kissattach /dev/ttyAMA0 1 
10.1.1.1" I would loose my wireless connection to the Raspberry Pi. Since I'm am 
using Putty to make an SSH connection I loose the connection.  I had this same problem on 
another Raspberry Pi when I started APRX and had to switch to a wired connection. The 
light goes out on the EDIMAX usb adapter and requires rebooting. I have seven Raspberry 
Pi's with four of them using the same wireless adapter and the only thing that causes a 
problem is APRX and AX25. Maybe a driver problem with the wireless interface I'm using.
As far as digipeating goes, I have APRX set to 'Direct Only' which is as close to 
being a 'Fill-in" as APRX gets. Even though I'm in a very rural area the  RF 
traffic gets bad here at times. If I could get thei owner of one particular digi to 
NOT do so much APRS-IS to RF retransmitting everyting would work so much better 
here. He has ignored all emails and letters I've sent. Don't know what else to do.
I maybe one of the few that actually listens to the APRS frequency. It's 
amazing that some of these stations are able to be decoded. I've gotten pretty 
good at DFing stuck transmitters over the years.
Thanks again for all the help.
Max KG4PID
_______________________________________________
Xastir mailing list
[email protected]
http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir


_______________________________________________
Xastir mailing list
[email protected]
http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir

Reply via email to