On Thu, Dec 10, 2015 at 09:28:50AM -0800, we recorded a bogon-computron collision of the <[email protected]> flavor, containing: > > Hey Danny, > > Once you get something working well, you might consider sending it to > Tom/Curt/etc so it can be added into Xastir!
Yeah. That's how tnc-startup.kpc2 got there (look at the CVS log for revision 1.1...) > On 12/10/2015 01:28 AM, Danny wrote: > > Thanks Tom ... > > > > I used your examples and am busy building my own startup file. > > > > Have a nice day > > > > Danny > > > > On Dec 10 15, Tom Russo : > >> To: Xastir - APRS client software discussion <[email protected]> > >> Date: Thu, 10 Dec 2015 00:22:44 -0700 > >> From: Tom Russo <[email protected]> > >> Subject: Re: [Xastir] KPC-3 config file > >> User-Agent: Mutt/1.5.24 (2015-08-30) > >> X-BeenThere: [email protected] > >> > >> On Thu, Dec 10, 2015 at 08:29:44AM +0200, we recorded a bogon-computron > >> collision of the <[email protected]> flavor, containing: > >>> Hi guys, > >>> > >>> Just want to know which startup file I must use for a KPC-3(non-plus) > >>> TNC. Also, > >>> is there someone that can provide me with one of their KPC-3 startup > >>> files. > >> If you don't get a response from someone that has a KPC-3 (non-plus) in > >> Xastir > >> operation, you can easily adapt the existing tnc-startup.kpc3 file (which > >> is > >> for the 3+) just by removing the 3+-specific commands from it. > >> > >> This should do the trick. Cut/paste everything between the "#------" lines > >> into a file in the same directory as the other tnc-startup files, and > >> point Xastir at it. This should be enough to use the old KPC-3 with > >> Xastir. > >> I have no KPC-3 to test on, but I did look on line at a KPC-3 manual just > >> now > >> to find the commands that existed in that model. > >> > >> I did something similar back when I first got into using Xastir with a very > >> old KPC-2. In fact, you'll find that "tnc-startup.kpc2" bears quite the > >> resemblance to the following. > >> > >> #------ > >> int terminal > >> HID off > >> B E 0 > >> DIGI on > >> ECho off > >> FILT off > >> FLow off > >> FUll off > >> HEA off > >> LFadd off > >> LFSup ON > >> AUTOLF off > >> MCOM off > >> MON ON > >> MResp OFF > >> MRPt on > >> MSTamp off > >> NEWmode off > >> #PACLen 128 > >> PASSALL off > >> # > >> # Important! Monitor only PID 0xf0 packets: > >> PID off > >> # > >> SCR 0 > >> #----- > >> > >> -- > >> Tom Russo KM5VY SAR502 DM64ux http://www.swcp.com/~russo/ > >> Tijeras, NM QRPL#1592 K2#398 SOC#236 > >> http://kevan.org/brain.cgi?DDTNM > >> echo "prpv_a'rfg_cnf_har_cvcr" | sed -e 's/_/ /g' | tr [a-m][n-z] > >> [n-z][a-m] > >> > >> > >> > >> > >> _______________________________________________ > >> Xastir mailing list > >> [email protected] > >> http://xastir.org/mailman/listinfo/xastir > > _______________________________________________ > > Xastir mailing list > > [email protected] > > http://xastir.org/mailman/listinfo/xastir > > _______________________________________________ > Xastir mailing list > [email protected] > http://xastir.org/mailman/listinfo/xastir -- Tom Russo KM5VY SAR502 DM64ux http://www.swcp.com/~russo/ Tijeras, NM QRPL#1592 K2#398 SOC#236 http://kevan.org/brain.cgi?DDTNM echo "prpv_a'rfg_cnf_har_cvcr" | sed -e 's/_/ /g' | tr [a-m][n-z] [n-z][a-m] _______________________________________________ Xastir mailing list [email protected] http://xastir.org/mailman/listinfo/xastir
