Set up your station configuration with coordinates in File->Configure->Station
Set up beacon type in File->configure->Defaults Set up beacon frequency in File->Configure->Timing Look in your interface settings in Interface->Interface Control and make sure that you have set up your TNC correctly as an interface and that "Allow Transmitting" is turned on. If it is all right, then open View->Incoming Data to watch what your interfaces see, and then click "Interface->Transmit Now". You should see your packet show up in the Incoming Data window. If you do not, your interface may not be set up correctly. If you do see it, watch your radio to see if it is actually transmitting (that is, do it again while watching your radio). If your radio is transmitting but nobody is seeing your packets, your TNC audio may not be set correctly and may be creating packet audio that is not decodable. See page 18 of the TNC Pi manual for how to adjust transmit audio on the device. On Sun, Nov 15, 2020 at 08:22:35PM +0000, we recorded a bogon-computron collision of the <kb8ui...@charter.net> flavor, containing: > I am unclear about setting up station data and beaconing. I am a fixed > station, entered mu coordinates but am not sending any routine packets > with any data. Not showing up on aprs.fi. An Igate digi is in within > range of me. I see his packets and am receiving packets from about 100 > miles away so far. When I tested with a local ham to see if he saw my > packets he did not see any thing. I saw his packets(BPQ). > I am using rasp pi model 3 and a tnc pi from coastal chip works. > Thanks in advance for any help > ChrisKB8UIH > _______________________________________________ > Xastir mailing list > Xastir@lists.xastir.org > http://xastir.org/mailman/listinfo/xastir -- Tom Russo KM5VY Tijeras, NM echo "prpv_a'rfg_cnf_har_cvcr" | sed -e 's/_/ /g' | tr [a-m][n-z] [n-z][a-m] _______________________________________________ Xastir mailing list Xastir@lists.xastir.org http://xastir.org/mailman/listinfo/xastir