Hi Mike. Well you could delete your ~/.xastir/config/xastir.cnf file. This is where all your configuration information is stored (also might be a couple of back-ups xastir.cnf.1, xastir.cnf.2..)BUT then you will have to re-configure everything.
Do you still have data coming in? (have a look at the View->Incoming Data window, make sure NET or NET&TNC is selected). If so, look in the Station->Filter Data menu. Make sure that "Select None" is UN-checked. You should have at least the following checked: Select Mine, Select Net, Select Stations & everything below it. If you have a tnc connected, then you will also want Select TNC, Select Direct, Select via Digi. Hope this helps, Mike Fenske VE7MKF At 08:59 AM 07/10/06 -0500, mike sullivan wrote: > >Running Kubuntu on a 1 ghz HP and doing well enough. Also have a WinXP > box. With CD's given by a friend I had been trying to run UIView. Had > problems there. Feeling confidant enough to try in Linux so enter my > foray with Xastir. Last night I finally got it running and displaying > information. Got tiger maps up and running and then tackled getting an > internet server configured. WOW ! information was flying of the net and > my screen was rapidly becoming unreadable. Made some changes to the > display. And at some point I lost all the info. I still have my tiger > map display but don't even have my icon showing. Is there some command I > can use, say from a terminal ?, to set things to a default state ? > Thanks Mike WN5PMR > San Antonio, TX _______________________________________________ Xastir mailing list Xastir@xastir.org http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
