For my weather stations, I've found that mounting the temperature sensor somewhat below mid way up a 2 meter or so long, vertically mounted section of 2 inch PVC pipe, painted silver or foiled - except for the top 5 inches. Darken the top 5-inch section to create some small thermal siphon effects. Oh - and keep the pipe ends well clear (1 meter) of building roof, ground, other obstructions. This method is dirt cheap and seems to yield good CWOP quality ratings... (plus observed solar fluxuations)
Doesn't keep the rain off completely, but very little actually comes that far right straight down the center of the tube to contact the sensor. I also acquired one of those barn turbine vents (for a dollar at a yard sale) and intend to try it out as a shield for a thermal sensor too... :) Bruce Bennett [EMAIL PROTECTED] (440) 352-8600 X 3350 ------------------------------------------------------------- All major advances can be directly attributed to optimistically under estimating the amount of work required for the task... _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
