On Sat, 24 Mar 2007 14:05:02 -0700, Craig Anderson wrote:
>How do I get aprsd to connect to the AX.25 interface >instead of directly into the TNC? I'm using aprsd 2.1.2. I find the following in /etc/aprsd/aprsd.conf: #Define the radio port to use #This can either be a serial port with a TNC (9600 baud) #as in /dev/ttyS1, or a Linux AX.25 network interface #as defined in /etc/ax25/axports. If you use a serial #device, ensure that you have write permissions. If you #use Linux sockets, you must run as root (or setuid). #If undefined all TNC related functions are disabled. tncport 1k2 #tncport /dev/ttyS1 My ax.25 TNC port is named 1k2. it works. 73 -Jim -- Jim Shorney -->.<--Put complaints in this box jshorney (at) inebraska.com Ham Radio NU0C Lincoln, NE, USA EN10ps http://incolor.inetnebr.com/jshorney/ _______________________________________________ Xastir mailing list Xastir@xastir.org http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir