Dan,
Thanks. I was hoping that something had changed since 2003. I am
considering putting up a 9600 baud APRS channel on 440 in the DFW
area. I would like to be able to digipeat between the the 2 meter
channel and the 440 channel. I don't use Xastir for digipeating now
but I see that it will digipeat, and I can configure multiple kiss
ports. I can see the piece that is missing are rules that would
specifically tell Xastir when to digi to another port.
The problems of layer 2 routing.
73,
Mark N5RFX
At 08:09 AM 4/15/2007, Dan Brown wrote:
On Sat, 14 Apr 2007, Mark Miller wrote:
> If I have two KISS TNC's on two serial ports will Xastir digipeat
> packets from one serial port to the other serial port?
> 73,
> Mark N5RFX
Can't say I have a good answer, since I only have one KISS TNC to play with
here, but, as has been noted previously, Xastir isn't entirely intended for
digipeating. You might find more flexibility and control for a multi-radio,
multi-port operation if you look into something like aprsdigi or Digi_ned.
See Also:
http://lists.xastir.org/pipermail/xastir/2003-July/002473.html
--
Dan Brown N8YSZ
[EMAIL PROTECTED]
_______________________________________________
Xastir mailing list
[EMAIL PROTECTED]
http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
_______________________________________________
Xastir mailing list
[EMAIL PROTECTED]
http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
