hi, this is a Saitek Pro Flight switchboard, I'm able to make a couple of switches working, but the issue is it's a 20 on/off switches, doesn't have any trimmer nor axis so normal mapping to an xbox360 controller doesn't seem good enough. Is it possible to have this somehow working via xboxdrv, or is there another software that does the same (catches evdev events and provides a jsX interface)?
marco@leila /dev/input/by-id $ evtest usb-HOLTEK_Saitek_Pro_Flight_Switch_Panel-event-if00 Input driver version is 1.0.1 Input device ID: bus 0x3 vendor 0x6a3 product 0xd67 version 0x100 Input device name: "HOLTEK Saitek Pro Flight Switch Panel" Supported events: Event type 0 (EV_SYN) Event type 1 (EV_KEY) Event code 256 (BTN_0) Event code 257 (BTN_1) Event code 258 (BTN_2) Event code 259 (BTN_3) Event code 260 (BTN_4) Event code 261 (BTN_5) Event code 262 (BTN_6) Event code 263 (BTN_7) Event code 264 (BTN_8) Event code 265 (BTN_9) Event code 266 (?) Event code 267 (?) Event code 268 (?) Event code 269 (?) Event code 270 (?) Event code 271 (?) Event code 272 (BTN_LEFT) Event code 273 (BTN_RIGHT) Event code 274 (BTN_MIDDLE) Event code 275 (BTN_SIDE) Event type 4 (EV_MSC) Event code 4 (MSC_SCAN) Thanks in advance, Marco. -- You received this message because you are subscribed to the Google Groups "xboxdrv" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/xboxdrv. For more options, visit https://groups.google.com/d/optout.
