Try to rerun the command 'rspconfig <mm> snmpcfg=enable sshcfg=enable' Thanks Best Regards ---------------------------------------------------------------------- Wang Xiaopeng (王晓朋) IBM China System Technology Laboratory Tel: 86-10-82453455 Email: [email protected] Address: 28,ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road, Haidian District Beijing P.R.China 100193
From: Kevin T Kidd <[email protected]> To: [email protected] Date: 2011-08-27 00:42 Subject: [xcat-user] BladeCenter MPA Problem After updating the password on the AMM the MPA table file had to be updated. After updating both, none of the remote commands are working giving errors for the blade nodes when running rpower or rvitals commands like "Error: data length 35 > 8 not supported): Timeout (parse length" and "Error: data length 116 > 8 not supported): Timeout (parse length". Any guidance would be helpful and appreciated. Thank You! Kevin ------------------------------------------------------------------------------ EMC VNX: the world's simplest storage, starting under $10K The only unified storage solution that offers unified management Up to 160% more powerful than alternatives and 25% more efficient. Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
<<inline: graycol.gif>>
------------------------------------------------------------------------------ EMC VNX: the world's simplest storage, starting under $10K The only unified storage solution that offers unified management Up to 160% more powerful than alternatives and 25% more efficient. Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev
_______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
