Hello,

Some more information.
1/ I was wrong when I said postscripts were not run, they are run.
2/ During install nodestat keeps saying "installing prep" which confirms 
that for one reason or another the node does not communicate its status to 
xcatd

Here is /tmp/mypostscript on n105 :
n105:~ # cat /tmp/mypostscript
BLADEMAXP='64'
export BLADEMAXP
DOMAIN='dsi.upmc.fr'
export DOMAIN
FSPTIMEOUT='0'
export FSPTIMEOUT
INSTALLDIR='/install'
export INSTALLDIR
IPMIMAXP='64'
export IPMIMAXP
IPMIRETRIES='3'
export IPMIRETRIES
IPMITIMEOUT='2'
export IPMITIMEOUT
CONSOLEONDEMAND='yes'
export CONSOLEONDEMAND
SITEMASTER=172.29.101.2
export SITEMASTER
MASTER=172.29.101.2
export MASTER
FORWARDERS='134.157.1.23,134.157.0.29'
export FORWARDERS
NAMESERVERS='172.29.101.2'
export NAMESERVERS
MAXSSH='8'
export MAXSSH
PPCMAXP='64'
export PPCMAXP
PPCRETRY='3'
export PPCRETRY
PPCTIMEOUT='0'
export PPCTIMEOUT
SHAREDTFTP='1'
export SHAREDTFTP
SNSYNCFILEDIR='/var/xcat/syncfiles'
export SNSYNCFILEDIR
TFTPDIR='/tftpboot'
export TFTPDIR
XCATDPORT='3001'
export XCATDPORT
XCATIPORT='3002'
export XCATIPORT
XCATCONFDIR='/etc/xcat'
export XCATCONFDIR
TIMEZONE='Europe/Paris'
export TIMEZONE
USENMAPFROMMN='no'
export USENMAPFROMMN
ENABLEASMI='no'
export ENABLEASMI
DB2INSTALLLOC='/mntdb2'
export DB2INSTALLLOC
DATABASELOC='/var/lib'
export DATABASELOC
SSHBETWEENNODES='ALLGROUPS'
export SSHBETWEENNODES
DNSHANDLER='ddns'
export DNSHANDLER
VSFTP='y'
export VSFTP
CLEANUPXCATPOST='no'
export CLEANUPXCATPOST
ENABLESSHBETWEENNODES=YES
export ENABLESSHBETWEENNODES
NODE=n105
export NODE
NFSSERVER=172.29.101.2
export NFSSERVER
PRIMARYNIC=eth0
export PRIMARYNIC
OSVER=sles11.1
export OSVER
ARCH=x86_64
export ARCH
PROFILE=compute
export PROFILE
PATH=`dirname $0`:$PATH
export PATH
NODESETSTATE='boot'
export NODESETSTATE
UPDATENODE=0
export UPDATENODE
NTYPE=compute
export NTYPE
MACADDRESS='E4:1F:13:4D:35:88'
export MACADDRESS
MONSERVER=chou-mgmt
export MONSERVER
MONMASTER=172.29.101.2
export MONMASTER
OSPKGS='@base,@x11,xntp,rsync'
export OSPKGS
# postscripts-start-here
syslog
remoteshell
syncfiles
fsmnt
gpfsinst
# postscripts-end-here
n105:~ # 

And here is lsdef (I have done a "nodeset n105 boot" while n105 was 
installing rpms to stop n105 from always reinstalling):

chou-mgmt:~ # lsdef n105
Object name: n105
    arch=x86_64
    bmc=n105-bmc
    bmcport=0
    currchain=boot
    currstate=boot
    groups=ipminocons,frame1,compute,all
    initrd=xcat/sles11.1/x86_64/initrd
    kcmdline=autoyast=http://172.29.101.2/install/autoinst/n105 
install=http://172.29.101.2/install/sles11.1/x86_64/1 netdevice=eth0
    kernel=xcat/sles11.1/x86_64/linux
    mac=E4:1F:13:4D:35:88
    mgt=ipmi
    netboot=xnba
    nfsserver=172.29.101.2
    os=sles11.1
    postbootscripts=otherpkgs,dhcpno
    postscripts=syslog,remoteshell,syncfiles,fsmnt,gpfsinst
    primarynic=eth0
    profile=compute
    provmethod=install
    status=booted
    statustime=11-16-2011 09:44:29
    switch=switch2
    switchport=5
chou-mgmt:~ # 

Thank you for your help. Best regards,



Antoine Tabary
 17 Avenue De L'europe

Certified HPC I/T Specialist
 Bois Colombes Cedex, 92275
0233AA
 France
ITS
 



 



 

e-mail:
[email protected]
 


 
 




From:   Lissa Valletta <[email protected]>
To:     xCAT Users Mailing list <[email protected]>
Cc:     xCAT Users Mailing list <[email protected]>
Date:   15/11/2011 19:58
Subject:        Re: [xcat-user] Node keeps reinstalling




Could you give me the entire contents of /tmp/mypostscript file from the
node?

Also give lsdef <nodename>




Lissa K. Valletta
2-3/T12
Poughkeepsie, NY 12601
(tie 293) 433-3102





From:            Antoine Tabary <[email protected]>
To:              xCAT Users Mailing list <[email protected]>
Date:            11/15/2011 11:10 AM
Subject:                 Re: [xcat-user] Node keeps reinstalling



Hello,

The MASTER variable is OK, but the block :
# subroutine used to run postscripts
...
# subroutine end
is missing

Any idea ?

Thank you for your help. Best regards,
  
  
  
  
  
 Antoine                               17 Avenue De L'europe (Embedded 
 Tabary                                                         image 
moved 
                                                                   to 
file: 
 pic38825.gif) 
  
 Certified                             Bois Colombes Cedex,  
 HPC I/T                              92275  
 Specialist  
  
  
 0233AA                                France  
  
 ITS  
  
  
  
  
  
 e-mail:    [email protected]  
  
  
  
  
  
  
  
  






From:        Lissa Valletta <[email protected]>
To:        xCAT Users Mailing list <[email protected]>
Cc:        xCAT Users Mailing list <[email protected]>
Date:        15/11/2011 13:39
Subject:        Re: [xcat-user] Node keeps reinstalling



Make sure that the site.master attribute is  an ip address of hostname 
that
will be resolvable during the install.   The usual problem is the node
cannot contact the MN to tell it, it is finished.
On the node you can look at the /tmp/mypostscript file.
It should look something like the following.   The last line is important,
because that is the we are finished line.   But it cannot be sent to the 
MN
unless $MASTER is an address that is resolvable on the node at that point.
If this file is empty, it is a pretty good sign that the node could not
contact the MN after install.

# subroutine used to run postscripts
.
.
.
}
# subroutine end


BLADEMAXP='64'
export BLADEMAXP
DOMAIN='cluster.com'
export DOMAIN
FSPTIMEOUT='0'
export FSPTIMEOUT
    .
    .
MASTER=10.16.0.103
export MASTER
 .
# postscripts-start-here
run_ps remoteshell
run_ps syncfiles
run_ps syslog
run_ps new_set
run_ps setbootfromnet
# postscripts-end-here
# postbootscripts-start-here
run_ps otherpkgs
# postbootscripts-end-here
updateflag.awk $MASTER 3002 "installstatus booted"


Lissa K. Valletta
2-3/T12
Poughkeepsie, NY 12601
(tie 293) 433-3102





From:                 Antoine Tabary <[email protected]>
To:                 xCAT Users Mailing list
<[email protected]>
Date:                 11/15/2011 05:45 AM
Subject:                 [xcat-user] Node keeps reinstalling



Hello,

We are tryoing to install an iDataplex cluster with SLES11 nodes.

The /tftpboot/xcat/xnba/nodes/n001 is not reset during installation so the
node keeps reinstalling itself. unless we type "nodeset n101 boot" before
it reboots. Any suggestion on what we have not configured ?

It does not run postscripts nor postbootscripts either.

We are running xcat 2.6.8 with xcat-dep-201111041626

Thank you for your help. Best regards,





Antoine                               17 Avenue De L'europe      (Embedded
Tabary                                                         image moved
                                                                  to file:
                                                             pic40165.gif)

Certified                             Bois Colombes Cedex,
HPC I/T                              92275
Specialist


0233AA                                France

ITS

e-mail:    [email protected]












Sauf indication contraire ci-dessus:/ Unless stated otherwise above:
Compagnie IBM France
Siège Social : 17 avenue de l'Europe, 92275 Bois-Colombes Cedex
RCS Nanterre 552 118 465
Forme Sociale : S.A.S.
Capital Social : 639.291.962.10 ?
SIREN/SIRET : 552 118 465 03644 - Code NAF 6202A
------------------------------------------------------------------------------


RSA(R) Conference 2012
Save $700 by Nov 18
Register now
http://p.sf.net/sfu/rsa-sfdev2dev1
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
[attachment "pic40165.gif" deleted by Antoine Tabary/France/IBM]
------------------------------------------------------------------------------

RSA(R) Conference 2012
Save $700 by Nov 18
Register now
http://p.sf.net/sfu/rsa-sfdev2dev1
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user



Sauf indication contraire ci-dessus:/ Unless stated otherwise above:
Compagnie IBM France
Siège Social : 17 avenue de l'Europe, 92275 Bois-Colombes Cedex
RCS Nanterre 552 118 465
Forme Sociale : S.A.S.
Capital Social : 639.291.962.10 ?
SIREN/SIRET : 552 118 465 03644 - Code NAF 6202A
------------------------------------------------------------------------------

RSA(R) Conference 2012
Save $700 by Nov 18
Register now
http://p.sf.net/sfu/rsa-sfdev2dev1
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
[attachment "pic38825.gif" deleted by Antoine Tabary/France/IBM] 
------------------------------------------------------------------------------
RSA(R) Conference 2012
Save $700 by Nov 18
Register now
http://p.sf.net/sfu/rsa-sfdev2dev1_______________________________________________

xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user



Sauf indication contraire ci-dessus:/ Unless stated otherwise above:
Compagnie IBM France
Siège Social : 17 avenue de l'Europe, 92275 Bois-Colombes Cedex
RCS Nanterre 552 118 465
Forme Sociale : S.A.S.
Capital Social : 639.291.962.10 ?
SIREN/SIRET : 552 118 465 03644 - Code NAF 6202A 

<<image/gif>>

------------------------------------------------------------------------------
RSA(R) Conference 2012
Save $700 by Nov 18
Register now
http://p.sf.net/sfu/rsa-sfdev2dev1
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user

Reply via email to