If it's like other IMM, you might try to push these settings via asu
IMM.SerialRedirectionCLIMode1=CLI active
IMM.SerialBaudRate=115200
uEFI.SerialCOMPort1=Enable
uEFI.SerialCOMPort2=Enable
uEFI.RemoteConsoleRedirection=Enable
uEFI.SerialPortSharing=Enable
uEFI.SerialPortAccessMode=Dedicated
uEFI.SPRedirection=Disable
uEFI.LegacyOptionRomPort=COM Port 1
uEFI.Com1BaudRate=115200
uEFI.Com1DataBits=8
uEFI.Com1Parity=None
uEFI.Com1StopBits=1
uEFI.Com1TextEmul=VT100
uEFI.Com1ActiveAfterBoot=Enable
uEFI.Com1FlowControl=Hardware
not sure all are always the same across all IMMs, but these settings
work for me (on an x server).
On 25/06//2012 18:45, SYED ASIF ZAHEER wrote:
Hi,
rcons is not working in HS23 IBM Bladecenter,
What are the settings need to do in*Management Module* to work rcons
in xcat.
and in bladecenter bios setting,
//
Regards
Syed Asif Zaheer
[email protected] <mailto:[email protected]>
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
