It turns out the /xcatpost/updateflag.awk was sending the status back to the xcatd and causing nodeset to run. This could not resolve the ip address and created a new DHCP entry without the fixed-address.
I had added new entries to the networks table. Restarted xcatd solved the problem. Mark Frenette mark.frene...@nuance.com ________________________________________ Message: 3 Date: Tue, 4 Dec 2012 09:39:26 -0500 From: Jarrod B Johnson <jbjoh...@us.ibm.com> Subject: Re: [xcat-user] DHCP lease loosing fixed-address To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net> Message-ID: <of8ca0673c.85c5b45c-on85257aca.0050281c-85257aca.00504...@us.ibm.com> Content-Type: text/plain; charset="us-ascii" Odd. FYI, fixed-address should only be missing if the name 'hv001' resolves to an address that overlaps in the networks.dynamicrange. I am unaware of any circumstance where it would change one moment to next unless dynamicrange was modified in the middle of operation... From: "Frenette, Mark" <mark.frene...@nuance.com> To: "xcat-user@lists.sourceforge.net" <xcat-user@lists.sourceforge.net>, Date: 12/04/2012 09:24 AM Subject: [xcat-user] DHCP lease loosing fixed-address I'm having a problem where a nodes dhcp lease entry is loosing the "fixed-address" line during an install. It seems to be happening during the postscript just before the reboot. I originally thought the dhclient was releasing it's address so I ran a tcpdump and didn't see anything going back to the dhcp server ports (67,68). I'm thinking it may be during the at the postscript updateflag when the xcatd does a nodeset boot. These are all RHEL62 with xCAT 2.7.3. This is a sample of the dhcpd.leases entry before the install: host hv001 { dynamic; hardware ethernet 98:4b:e1:0f:68:b2; fixed-address 10.30.22.6; supersede server.ddns-hostname = "hv001"; supersede host-name = "hv001"; if option vendor-class-identifier = "ScaleMP" { supersede server.filename = "vsmp/pxelinux.0"; } else { supersede server.filename = "pxelinux.0"; } supersede server.next-server = 0a:1e:16:0f; } The line "fixed-address 10.30.22.6;" is missing after the install and before postbootscripts is run. Any help would be appreciated. Mark Frenette mark.frene...@nuance.com ------------------------------------------------------------------------------ LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial Remotely access PCs and mobile devices and provide instant support Improve your efficiency, and focus on delivering more value-add services Discover what IT Professionals Know. Rescue delivers http://p.sf.net/sfu/logmein_12329d2d _______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user -------------- next part -------------- An HTML attachment was scrubbed... -------------- next part -------------- A non-text attachment was scrubbed... Name: graycol.gif Type: image/gif Size: 105 bytes Desc: not available ------------------------------ ------------------------------------------------------------------------------ LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial Remotely access PCs and mobile devices and provide instant support Improve your efficiency, and focus on delivering more value-add services Discover what IT Professionals Know. Rescue delivers http://p.sf.net/sfu/logmein_12329d2d ------------------------------ _______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user End of xCAT-user Digest, Vol 40, Issue 6 **************************************** ------------------------------------------------------------------------------ LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial Remotely access PCs and mobile devices and provide instant support Improve your efficiency, and focus on delivering more value-add services Discover what IT Professionals Know. Rescue delivers http://p.sf.net/sfu/logmein_12329d2d _______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user