Hello all,
Anyone have any idea on why the rcons output works only during the HW
initialization , and even in the ctrl-H (controller settings) and or F1 setup,
but then once it exits that and boots into the OS we lose all output/activity
w/ rcons? We can log into the OS, just nothing on the console. Thanks in
advance.
The last thing we see is in rcons…….
Initializing Intel(R) Boot Agent GE v1.3.31
PXE 2.1 Build 086 (WfM 2.0)
Intel(R) Boot Agent GE v1.3.31
Copyright (C) 1997-2009, Intel Corporation
PXE-M0F: Exiting Intel Boot Agent.
Probing EDD (edd=off to disable)... ok
Ÿ
----------------------------------------------
XCAT SERVER~]# rcons “data-node server”
[Enter `^Ec?' for help]
~. [terminated ipmitool]
Info: SOL payload already de-activated
[SOL Session operational. Use ~? for help]
-------------------------------------------------
Console re-direction settings
COM Port 1 <Enable>
COM Port 2 <Enable>
Remote Console <Enable
Serial Port Sharing <Enable>
Serial Port Access Mode <Dedicated>
SP Redirection <Disable>
Legacy Option ROM Display <COM Port 1>
COM1 Settings
|
Baud Rate <115200> |
Data Bits <8> |
Parity <None> |
Stop Bits <1> |
Terminal Emulation <VT100> |
Active After Boot <Enable>
Flow Control <Hardware>
------------------------------------------------------------------------------
See everything from the browser to the database with AppDynamics
Get end-to-end visibility with application monitoring from AppDynamics
Isolate bottlenecks and diagnose root cause in seconds.
Start your free trial of AppDynamics Pro today!
http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user