Hi I am working my way slowly through configuring our test idataplex installing xcat from scratch (for reasons not relevant to this).
I get the stateless nodes as far as: xCAT Network Boot Agent iPXE 1.0.3-131028 (d603e) -- Open Source Network Boot Firmware -- http://ipxe.org Features: HTTP HTTPS iSCSI DNS TFTP EFI net0: 5c:f3:fc:a9:3a:fa using <NULL> on EFI SNP (open) [Link:up, TX:0 TXE:0 RX:0 RXE:0] DHCP (net0 5c:f3:fc:a9:3a:fa)... ok net0: 172.20.101.13/255.255.0.0 gw 172.20.0.1 Next server: 172.20.0.1 Filename: http://172.20.0.1/tftpboot/xcat/xnba/nodes/n02.uefi http://172.20.0.1/tftpboot/xcat/xnba/nodes/n02.uefi... ok http://172.20.0.1/tftpboot/xcat/elilo-x64.efi... ok ELILO v3.14 for EFI/x86_64 Loading kernel /tftpboot/xcat/osimage/centosnetbootimage/kernel... done Loading file /tftpboot/xcat/osimage/centosnetbootimage/initrd-stateless.gz...done Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32-431.el6.x86_64 ([email protected]<mailto:[email protected]>) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-4) (GCC) ) #1 SMP Fri Nov 22 03:15:09 UTC 2013 Command line: BOOT_IMAGE=net1:/tftpboot/xcat/osimage/centosnetbootimage/kernel imgurl=http://172.20.0.1:80//install/netboot/centos6.5/x86_64/compute/rootimg.gz XCAT=172.20.0.1:3001 NODE=n02 FC=yes ifname=eth0:5c:f3:fc:a9:3a:fa netdev=eth0 console=tty0 console=ttyS0,115200n8r BOOTIF=01-5c-f3-fc-a9-3a-fa . .skip lines . sd 1:0:1:0: [sdd] Attached SCSI disk igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX Only once has a node continued thus: sd 1:0:0:0: [sdc] Attached SCSI disk igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX Getting http://172.20.0.1:80//install/netboot/centos6.5/x86_64/compute/rootimg.gz... --2014-02-27 11:00:20-- http://172.20.0.1//install/netboot/centos6.5/x86_64/compute/rootimg.gz Connecting to 172.20.0.1:80... connected. and on to login. Any ideas why none of the nodes now will not access the rooting? Thanks Chris ======================================== Chris Reidy Systems Administrator High Performance Computing (520) 621-0502 [cid:[email protected]]
<<attachment: PastedGraphic-2.tiff>>
------------------------------------------------------------------------------ Flow-based real-time traffic analytics software. Cisco certified tool. Monitor traffic, SLAs, QoS, Medianet, WAAS etc. with NetFlow Analyzer Customize your own dashboards, set traffic alerts and generate reports. Network behavioral analysis & security monitoring. All-in-one tool. http://pubads.g.doubleclick.net/gampad/clk?id=126839071&iu=/4140/ostg.clktrk
_______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
