You could create a partitioning layout that didn't use LVM, so it would have no need to run those commands.
Michael On 04/03/2014 09:49 AM, Engdahl, Rod wrote: > > Does that mean that until 2.8.5, basically sysclone does not, for all > intents and purposes, actually function to clone RHEL servers? If it > cannot run pvcreate, etc., it cannot create the file systems . . . > > > > Is there any way to update the genesis image to include those commands > to make sysclone work? > > > > *From:*Wei Hua WH Hu [mailto:[email protected]] > *Sent:* Wednesday, April 02, 2014 11:42 PM > *To:* [email protected]; Engdahl, Rod > *Subject:* Re: [xcat-user] Sysclone: Genesis Image missing commands > (pvcreate, lvcreate, etc.) > > > > Genesis Image does miss commands (pvcreate, lvcreate, etc.), I have > open a defect to track this issue. defect number is 4039. > > Hi Engdahl, > > We plan to fix this issue at xcat 2.8.5 (maybe ahead this plan, You > could pay attention to the status of defect#4039)Thanks. > > Best Regards! > -------------------------------------------------------------- > Hu, Wei Hua (???) > IBM China System Technology Laboratory > Email: [email protected] <mailto:[email protected]> > Tel: 86-10-82453253 > Address: Building 28, ZhongGuanCun Software Park, > No.8, Dong Bei Wang West Road, Haidian District Beijing > 100193, PRC > > ???????????8? ???? ??28? ? > ??: 100193 > > > From: "Engdahl, Rod" <[email protected] <mailto:[email protected]>> > To: "[email protected] > <mailto:[email protected]>" > <[email protected] > <mailto:[email protected]>>, > Date: 04/02/2014 11:03 PM > Subject: [xcat-user] Sysclone: Genesis Image missing commands > (pvcreate, lvcreate, etc.) > > ------------------------------------------------------------------------ > > > > > xCAT 2.8.3, RHEL 6.4 > > I installed systemimage-server on our xcat server, and > systemimage-client on a target node and ran: > > > imcapture <sourcenode> -t sysclone <imagename> > > After this command did its thing and populated the appropriate > /install directories, I ran: > > nodeset <targetnode> osimage=<imagename> > rsetboot <targetnode> net > rpower <targetnode> reset > > > Things appeared to go swimmingly for a while, but as the Genesis image > was executing /scripts/sl73caeapp30-image.master, the script died a > horrible death because things like pvcreate were not in the Genesis > image that was supposed to be setting up the file systems. > > Ending several lines of output from the running of > /scripts/sl73caeapp30-image.master: > > __________________________________________ > New partition table for /dev/sda: > parted -s -- /dev/sda print > Model: IBM ServeRAID M5015 (scsi) > Disk /dev/sda: 36.0TB > Sector size (logical/physical): 512B/512B > Partition Table: gpt > > Number Start End Size File system Name Flags > 1 17.4kB 105MB 105MB primary > 2 105MB 84.sh: no job control in this shell > sh-4.1# 0GB 83.9GB > primary > 3 84.0GB 84.2GB 210MB primary > 4 84.2GB 36.0TB 35.9TB primary > > Load software RAID modules. > FATAL: Module linear not found. > FATAL: Module raid0 not found. > FATAL: Module raid1 not found. > FATAL: Module raid5 not found. > FATAL: Module raid6 not found. > FATAL: Module raid10 not found. > FATAL: Module raid456 not found. > Load device mapper driver (for LVM). > FATAL: Module dm_mod not found. > Initializing partition /dev/sda2 for use by LVM. > pvcreate -M2 -ff -y /dev/sda2 || shellout > /scripts/sl73caeapp30-image.master: line 263: pvcreate: command not found > Last command exited with 127 > Killing off running processes. > > write_variables > cat: /etc/issue: No such file or directory > ___________________________________ > The following are the contents of /bin and /sbin > > sh-4.1# ls /bin > allowcred.awk dd getdestiny mknod sed > basename df getipmi mount sh > bash dmesg grep mv sleep > bmcsetup dodiscovery gzip netstat sort > cat dosysclone hostname nextdestiny tar > chmod doxcat ifup ping touch > chown echo kill ps > udpcat.awk > cp egrep ln remoteimmsetup umount > cpio find ls restart uname > minixcatd.awk rm vi > date getcert mkdir rpm > > sh-4.1# ls /sbin > blkid initqueue lspci modprobe > route udevadm > blockdev insmod lvm mount.nfs > rpc.statd udevd > dhclient ip mdadm parted > rpcbind vconfig > dhclient-script kexec mkdosfs pidof > rsyslogd xcatroot > ethtool killall5 mke2fs pivot_root > setupimmnic > findfs klogd mkfs > poweroff shutdown > hwclock loadmlxeth mkfs.ext4 reboot swapon > ifconfig loginit mkreiserfs reiserfstune > switch_root > ifenslave lsmod mkswap rmmod > tune2fs > > > > > > Any idea how I get a Genesis image that has the missing commands? > > Thanks, > > Rod. > > > ------------------------------------------------------------------------------ > _______________________________________________ > xCAT-user mailing list > [email protected] <mailto:[email protected]> > https://lists.sourceforge.net/lists/listinfo/xcat-user > > > > ------------------------------------------------------------------------------ > > > _______________________________________________ > xCAT-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
_______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
