Hello, I'm trying to configure a second domain in xCAT. I have the interface configured both with an IP and as a DHCP interface on the master node. The networks table has been populated and the appropriate fixed IPs for nodes in that domain have been added to the host file. All the nodes have been added to the appropriate tables and the lsdef commands work as expected, as does DNS. However, DHCP does not seedm as willing to cooperate. The nodes are defined in the leases file without issue, but there is never a fixed IP assigned to them (there is a dynamic range defined for this network, but these nodes are not in that range). There are also times when the MACs are defined in the leases file, but not with the fixed IPs that are desired. The results seems to be a discovery loop. makedhcp -q never responds with the appropriate information. I've also tried defining the nodes in the hosts tables, which isn't necessary for the default domain. I've also configured a node for the default domain and everything works as it should. Any info that will help me resolve this issue would be appreciated. Thanks.
-- Will ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
