In your case, why the first line in my email did not get an IP in your
scenario? Even your IP changed in the dhcp server, the PRINIC should have
the first IP in this situation.
And what's your specific requirement to have two IPs?
IP=$(ip addr show dev $PRINIC | grep inet | grep -v inet6 | awk '{print
$2}' | head -n 1 | awk -F '/' '{print $1}')
if [ -z $IP ]
then
dhclient eth0
#IP=$(ifconfig $PRINIC | grep inet | awk '{print $2}' | awk -F:
'{print $2}')
IP=$(ip addr show dev $PRINIC | grep inet | grep -v inet6 | awk
'{print $2}' | head -n 1 | awk -F '/' '{print $1}')
fi
Thanks
Best Regards
----------------------------------------------------------------------
Wang Xiaopeng (王晓朋)
IBM China System Technology Laboratory
Tel: 86-10-82453455
Email: [email protected]
Address: 28,ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road,
Haidian District Beijing P.R.China 100193
From: Samveen ListReceipient <[email protected]>
To: xCAT Users Mailing list <[email protected]>
Date: 2015/07/01 12:59
Subject: Re: [xcat-user] Multiple IPs during postinstall in kickstart
causing DDNS issues
The IP didn't change. Instead 2 IPs were assigned to the interface on the
node. However, in the DNS, the hostname was now associated with the 2nd IP
provided to the node, while the updateflag.awk requests go via the 1st IP.
Thus xcat ignores the flag updates.
On Wed, Jul 1, 2015 at 9:52 AM, Xiao Peng Wang <[email protected]> wrote:
I don't see problem to adopt your fix. But what caused the IP change of
your installnic?
Thanks
Best Regards
----------------------------------------------------------------------
Wang Xiaopeng (王晓朋)
IBM China System Technology Laboratory
Tel: 86-10-82453455
Email: [email protected]
Address: 28,ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road,
Haidian District Beijing P.R.China 100193
Inactive hide details for Samveen ListReceipient ---2015/06/29
19:25:22---Hi, My diskful install process gets stuck in the postSamveen
ListReceipient ---2015/06/29 19:25:22---Hi, My diskful install process
gets stuck in the post-install process on the
From: Samveen ListReceipient <[email protected]>
To: xCAT <[email protected]>
Date: 2015/06/29 19:25
Subject: [xcat-user] Multiple IPs during postinstall in kickstart causing
DDNS issues
Hi,
My diskful install process gets stuck in the post-install process on the
`updateflag.awk` script. I understand that this happens when the IP of
the node doesn't resolve to a name.
However, what bothers me is that this is caused by the assignment of 2
IPs to the `ksdevice`.
The DHCP server deletes the ddns entry for the first IP lease, and
assigns the details of the 2nd lease in the DNS server. However, the
updateflag.awk script is communicating via the primary IP (it cannot
select the secondary IP as the local interface to use).
xCAT Server log entries of the process:
Jun 29 07:38:43 xcatmn01 dhcpd: DHCPDISCOVER from 00:25:90:14:f8:18 via
10.2.72.1
Jun 29 07:38:43 xcatmn01 dhcpd: DHCPOFFER on 10.2.72.9 to
00:25:90:14:f8:18 via 10.2.72.1
Jun 29 07:38:43 xcatmn01 dhcpd: DHCPREQUEST for 10.2.72.9 (10.2.80.2)
from 00:25:90:14:f8:18 via 10.2.72.1
Jun 29 07:38:43 xcatmn01 dhcpd: DHCPACK on 10.2.72.9 to 00:25:90:14:f8:18
via 10.2.72.1
Jun 29 07:44:28 xcatmn01 dhcpd: DHCPDISCOVER from 00:25:90:14:f8:18 via
10.2.72.1
Jun 29 07:44:28 xcatmn01 dhcpd: ICMP Echo reply while lease 10.2.72.9
valid.
Jun 29 07:44:28 xcatmn01 named[32259]: client 10.2.80.2#40866: signer
"xcat_key" approved
Jun 29 07:44:28 xcatmn01 named[32259]: client 10.2.80.2#40866: updating
zone 'poc.lzd.co/IN': deleting an RR at xcatsn01.poc.lzd.co A
Jun 29 07:44:28 xcatmn01 dhcpd: if xcatsn01.poc.lzd.co IN TXT
"00f5c60bb5f8359302de635845435af5aa" rrset exists and xcatsn01.poc.lzd.co
IN A 10.2.72.9 rrset exists delete xcatsn01.poc.lzd.co IN A 10.2.72.9:
success.
Jun 29 07:44:28 xcatmn01 named[32259]: client 10.2.80.2#49121: signer
"xcat_key" approved
Jun 29 07:44:28 xcatmn01 named[32259]: client 10.2.80.2#49121: updating
zone 'poc.lzd.co/IN': deleting an RR at xcatsn01.poc.lzd.co TXT
Jun 29 07:44:28 xcatmn01 dhcpd: if xcatsn01.poc.lzd.co IN A rrset doesn't
exist and xcatsn01.poc.lzd.co IN AAAA rrset doesn't exist delete
xcatsn01.poc.lzd.co IN TXT "00f5c60bb5f8359302de635845435af5aa": success.
Jun 29 07:44:28 xcatmn01 named[32259]: client 10.2.80.2#38415: signer
"xcat_key" approved
Jun 29 07:44:28 xcatmn01 named[32259]: client 10.2.80.2#38415: updating
zone '72.2.10.IN-ADDR.ARPA/IN': deleting rrset at
'9.72.2.10.IN-ADDR.ARPA' PTR
Jun 29 07:44:28 xcatmn01 dhcpd: removed reverse map on
9.72.2.10.in-addr.arpa.
Jun 29 07:44:28 xcatmn01 dhcpd: Abandoning IP address 10.2.72.9: pinged
before offer
Jun 29 07:44:36 xcatmn01 dhcpd: DHCPDISCOVER from 00:25:90:14:f8:18 via
10.2.72.1
Jun 29 07:44:37 xcatmn01 dhcpd: DHCPOFFER on 10.2.72.10 to
00:25:90:14:f8:18 via 10.2.72.1
Jun 29 07:44:37 xcatmn01 named[32259]: client 10.2.80.2#58725: signer
"xcat_key" approved
Jun 29 07:44:37 xcatmn01 named[32259]: client 10.2.80.2#58725: updating
zone 'poc.lzd.co/IN': adding an RR at 'xcatsn01.poc.lzd.co' A
Jun 29 07:44:37 xcatmn01 named[32259]: client 10.2.80.2#58725: updating
zone 'poc.lzd.co/IN': adding an RR at 'xcatsn01.poc.lzd.co' TXT
Jun 29 07:44:37 xcatmn01 dhcpd: Added new forward map from
xcatsn01.poc.lzd.co to 10.2.72.10
Jun 29 07:44:37 xcatmn01 named[32259]: client 10.2.80.2#58276: signer
"xcat_key" approved
Jun 29 07:44:37 xcatmn01 named[32259]: client 10.2.80.2#58276: updating
zone '72.2.10.IN-ADDR.ARPA/IN': deleting rrset at
'10.72.2.10.IN-ADDR.ARPA' PTR
Jun 29 07:44:37 xcatmn01 named[32259]: client 10.2.80.2#58276: updating
zone '72.2.10.IN-ADDR.ARPA/IN': adding an RR at '10.72.2.10.IN-ADDR.ARPA'
PTR
Jun 29 07:44:37 xcatmn01 dhcpd: added reverse map from
10.72.2.10.in-addr.arpa. to xcatsn01.poc.lzd.co
Jun 29 07:44:37 xcatmn01 dhcpd: DHCPREQUEST for 10.2.72.10 (10.2.80.2)
from 00:25:90:14:f8:18 via 10.2.72.1
Jun 29 07:44:37 xcatmn01 dhcpd: DHCPACK on 10.2.72.10 to
00:25:90:14:f8:18 via 10.2.72.1
When I check in the console on the node (the 2nd console, Ctrl-Alt-F2), I
see 2 addresses assigned to the `ksdevice` (Both the IPs assigned to MAC
00:25:90:14:f8:18 : 10.2.72.9 and 10.2.72.10).
This is done in the %post section of the kickstart file:
[root@xcatmn01 tmp]# grep 'dhclient ' /install/autoinst/xcatsn01
dhclient eth0
The primary nic is `eth1`, and the template (
xCAT-server/share/xcat/install/scripts/post.rh.common) has these line:
[samveen@development xcat-core]$ git blame
xCAT-server/share/xcat/install/scripts/post.rh.common |tail -n +38 |head
-n 7
53374908 (immarvin 2014-05-30 03:12:08 -0700 38) IP=$(ip addr show dev
$PRINIC | grep inet | grep -v inet6 | awk '{print $2}' | head -n 1 |
awk -F '/' '{print $1}')
8168b22e (ligc 2012-03-23 08:26:38 +0000 39) if [ -z $IP ]
8168b22e (ligc 2012-03-23 08:26:38 +0000 40) then
8168b22e (ligc 2012-03-23 08:26:38 +0000 41) dhclient eth0
53374908 (immarvin 2014-05-30 03:12:08 -0700 42) #IP=$(ifconfig $PRINIC |
grep inet | awk '{print $2}' | awk -F: '{print $2}')
53374908 (immarvin 2014-05-30 03:12:08 -0700 43) IP=$(ip addr
show dev $PRINIC | grep inet | grep -v inet6 | awk '{print $2}' | head
-n 1 | awk -F '/' '{print $1}')
8168b22e (ligc 2012-03-23 08:26:38 +0000 44) fi
Given that this script sets the variable `PRINIC`, Line 4 should be as
follows(as can be seen from line 43):
--- a/xCAT-server/share/xcat/install/scripts/post.rh.common
+++ b/xCAT-server/share/xcat/install/scripts/post.rh.common
@@ -38,7 +38,7 @@ fi
IP=$(ip addr show dev $PRINIC | grep inet | grep -v inet6 | awk
'{print $2}' | head -n 1 | awk -F '/' '{print $1}')
if [ -z $IP ]
then
- dhclient eth0
+ dhclient $PRINIC
#IP=$(ifconfig $PRINIC | grep inet | awk '{print $2}' | awk -F:
'{print $2}')
IP=$(ip addr show dev $PRINIC | grep inet | grep -v inet6 |
awk '{print $2}' | head -n 1 | awk -F '/' '{print $1}')
fi
This fixes my problems.
Regards,
--
Samveen S. Gulati
http://samveen.in
The best-laid schemes o' mice an 'men
Gang aft agley,
An'lea'e us nought but grief an' pain,
For promis'd joy!
-- Robert Burns
(The best laid plans of mice and men often go awry,
and bring nothing but grief and pain instead of ..)
------------------------------------------------------------------------------
Monitor 25 network devices or servers for free with OpManager!
OpManager is web-based network management software that monitors
network devices and physical & virtual servers, alerts via email & sms
for fault. Monitor 25 devices for free with no restriction. Download now
http://ad.doubleclick.net/ddm/clk/292181274;119417398;o
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Don't Limit Your Business. Reach for the Cloud.
GigeNET's Cloud Solutions provide you with the tools and support that
you need to offload your IT needs and focus on growing your business.
Configured For All Businesses. Start Your Cloud Today.
https://www.gigenetcloud.com/
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
--
--
Samveen S. Gulati
http://samveen.in
The best-laid schemes o' mice an 'men
Gang aft agley,
An'lea'e us nought but grief an' pain,
For promis'd joy!
-- Robert Burns
(The best laid plans of mice and men often go awry,
and bring nothing but grief and pain instead of ..)
------------------------------------------------------------------------------
Don't Limit Your Business. Reach for the Cloud.
GigeNET's Cloud Solutions provide you with the tools and support that
you need to offload your IT needs and focus on growing your business.
Configured For All Businesses. Start Your Cloud Today.
https://www.gigenetcloud.com/
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Don't Limit Your Business. Reach for the Cloud.
GigeNET's Cloud Solutions provide you with the tools and support that
you need to offload your IT needs and focus on growing your business.
Configured For All Businesses. Start Your Cloud Today.
https://www.gigenetcloud.com/
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
