Sorry for mistake of eth1, should eth0 in previous mail.
/sbin/ip addr add 10.10.101.51/24 dev eth0
/sbin/ip link set eth0 up
You should use:
/sbin/ip addr add 10.10.101.51/24 broadcast 10.10.101.255 dev
eth0
Best Regards
--------------------------------------------------
Yuan Bai (白媛)
CSTL HPC System Management Development
Tel:86-10-82451401
E-mail: [email protected]
Address: IBM ZGC Campus. Ring Building 28,
ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road, Haidian
District,
Beijing P.R.China 100193
IBM环宇大厦
北京市海淀区东北旺西路8号，中关村软件园28号楼
邮编:100193
From: "Yuan Y Bai" <[email protected]>
To: xCAT Users Mailing list <[email protected]>
Date: 05/22/2017 02:18 PM
Subject: Re: [xcat-user] Bcast address 0.0.0.0 Statelite deployment
Hi Gilad,
I provisioned sles12.2 statelite using xCAT, I cannot reproduce this Bcase
adress 0.0.0.0 for install nic through provisioning.
I have following questions:
1, Is eth0 your install nic? install nic is configured by dhcp in xCAT, if
eth0 is install nic, the bcast is not configured by xCAT directly, it
should be calculated.
2, Is eth0 configured by scripts from xCAT? for example, do you use
confignics or confignetwork scipts or etc to configure eth0?
If you using scripts in xCAT, could you tell me which scripts? I can look
into it.
3, If you using other scripts to configure eth0, the following command may
cause the bcast address as 0.0.0.0:
/sbin/ip link set eth0 down
/sbin/ip addr add 10.10.101.51/24 dev eth0
/sbin/ip link set eth0 up
You should use:
/sbin/ip addr add 10.10.101.51/24 broadcast 10.10.101.255 dev
eth0
Best Regards
--------------------------------------------------
Yuan Bai (白媛)
CSTL HPC System Management Development
Tel:86-10-82451401
E-mail: [email protected]
Address: IBM ZGC Campus. Ring Building 28,
ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road, Haidian District,
Beijing P.R.China 100193
IBM环宇大厦
北京市海淀区东北旺西路8号，中关村软件园28号楼
邮编:100193
Inactive hide details for "Yuan Y Bai" ---05/22/2017 10:55:37 AM---Hi
Gilad, Thanks your information, let me try to reproduce i"Yuan Y Bai"
---05/22/2017 10:55:37 AM---Hi Gilad, Thanks your information, let me try
to reproduce it in my environment.
From: "Yuan Y Bai" <[email protected]>
To: xCAT Users Mailing list <[email protected]>
Date: 05/22/2017 10:55 AM
Subject: Re: [xcat-user] Bcast address 0.0.0.0 Statelite deployment
Hi Gilad,
Thanks your information, let me try to reproduce it in my environment.
Best Regards
--------------------------------------------------
Yuan Bai (白媛)
CSTL HPC System Management Development
Tel:86-10-82451401
E-mail: [email protected]
Address: IBM ZGC Campus. Ring Building 28,
ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road, Haidian District,
Beijing P.R.China 100193
IBM环宇大厦
北京市海淀区东北旺西路8号，中关村软件园28号楼
邮编:100193
Inactive hide details for Gilad Berman ---05/20/2017 04:06:14 AM---All, I
am assuming many linux experts on this list, so sinceGilad Berman
---05/20/2017 04:06:14 AM---All, I am assuming many linux experts on this
list, so since I am not sure this is purely xCAT issue
From: Gilad Berman <[email protected]>
To: xCAT Users Mailing list <[email protected]>
Date: 05/20/2017 04:06 AM
Subject: [xcat-user] Bcast address 0.0.0.0 Statelite deployment
All,
I am assuming many linux experts on this list, so since I am not sure this
is purely xCAT issue, any hints are more than welcome 😊
In our statelite deployment the boot interface comes up with broadcast
address of 0.0.0.0 –
# ifconfig eth0
eth0 Link encap:Ethernet HWaddr 6C:AE:8B:08:8E:03
inet addr:10.10.101.51 Bcast:0.0.0.0 Mask:255.255.255.0
….
The broadcast address can be setup easily with ifconfig eth0 broadcast.
Eth1 boots with the right bcast address.
I wonder what could cause this issue, when seems there is no limitation on
setting it.
OS is SLES12.2 and deployment method is statelite (statefull works as
expected).
THX in advance!
http://lenovocentral.lenovo.com/marketing/branding/email_signature/images/gradient.gif
DCG-Hardware
Gilad Berman
HPC Architect
Lenovo EMEA
Phone+972-52-2554262
[email protected]
Lenovo.com
Twitter | Facebook | Instagram | Blogs | Forums
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
