So I removed it from the node’s definition in the nodehm table:
[root@mgt pxelinux.cfg]# nodels qnode5118 nodehm
qnode5118: nodehm.mgt: ipmi
qnode5118: nodehm.serialport: 0
qnode5118: nodehm.node: qnode5118
qnode5118: nodehm.serialspeed: 115200
qnode5118: nodehm.serialflow:
qnode5118: nodehm.cmdmapping:
qnode5118: nodehm.termport:
qnode5118: nodehm.comments:
qnode5118: nodehm.consoleondemand:
qnode5118: nodehm.cons:
qnode5118: nodehm.conserver:
qnode5118: nodehm.getmac:
qnode5118: nodehm.termserver:
qnode5118: nodehm.power:
qnode5118: nodehm.disable:
Set it to boot:
[root@mgt pxelinux.cfg]# nodeset qnode5118 boot
qnode5118: boot
Rebooted it and it still hangs:
[root@mgt pxelinux.cfg]# rpower qnode5118 boot
qnode5118: reset
> On May 25, 2017, at 1:52 PM, Gilad Berman <[email protected]> wrote:
>
> Do you have consoles on demand set to yes in the site table (or specific to
> the node)? <>
> If yes, remove “hard” from your console settings, nodeset again and try.
>
> If this is a similar case, it is because when you set the flow control to
> hardware, the OS waits for the serial console to be connected (which is flow
> control..)
>
>
> <image001.gif>
> Gilad Berman
> HPC Architect
> Lenovo EMEA
> <image002.gif>+972-52-2554262
> <image003.gif>[email protected] <mailto:[email protected]>
>
> Lenovo.com <http://www.lenovo.com/>
> Twitter <http://twitter.com/lenovo> | Facebook
> <http://www.facebook.com/lenovo> | Instagram <https://instagram.com/lenovo> |
> Blogs <http://blog.lenovo.com/> | Forums <http://forums.lenovo.com/>
> <image004.gif>
>
>
> From: Damir Krstic [mailto:[email protected]]
> Sent: Thursday, May 25, 2017 9:44 PM
> To: xCAT Users Mailing list <[email protected]>
> Subject: [xcat-user] problems booting redhat 7.3 on NextScale 360M5
>
> We are installing RH7.3 on NextScale nodes and after the install, node
> reboots. The problem is node seems to get "stuck" until I rcons into it and
> then it continues booting. So far, I can't pinpoint exact spot where it gets
> stuck, but it just sits there until I remote console (rcons) into it and then
> it continues booting. Here is where the last one got stuck until I did remote
> console:
>
> [root@mgt ~]# rcons qnode5118
> [Enter `^Ec?' for help]
> Info: SOL payload already de-activated
> [SOL Session operational. Use ~? for help]
> ??6?+
> ?+#6cK??6?[?+s?
> [ 131.345026] systemd[1]: Created slice Root Slice.
> [ 131.350307] systemd[1]: Starting Root Slice.
> [ OK ] Listening on Journal Socket.
> [ 131.360103] systemd[1]: Listening on Journal Socket.
> [ 131.365676] systemd[1]: Starting Journal Socket.
> [ OK ] Listening on udev Control Socket.
> [ 131.377102] systemd[1]: Listening on udev Control Socket.
> [ 131.383152] systemd[1]: Starting udev Control Socket.
> [ OK ] Listening on udev Kernel Socket.
> [ 131.395101] systemd[1]: Listening on udev Kernel Socket.
> [ 131.401055] systemd[1]: Starting udev Kernel Socket.
> [ OK ] Reached target Sockets.
> [ 131.411102] systemd[1]: Reached target Sockets.
> [ 131.416180] systemd[1]: Starting Sockets.
> [ OK ] Created slice System Slice.
> [ 131.426105] systemd[1]: Created slice System Slice.
> [ 131.431578] systemd[1]: Starting System Slice.
> [ 131.437357] systemd[1]: Starting Apply Kernel Variables...
> Starting Apply Kernel Variables...
> [ 131.448652] systemd[1]: Starting Journal Service...
>
> Any help is appreciated.
> Thanks,
> Damir
>
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org <http://slashdot.org/>!
> http://sdm.link/slashdot_______________________________________________
> <http://sdm.link/slashdot_______________________________________________>
> xCAT-user mailing list
> [email protected] <mailto:[email protected]>
> https://lists.sourceforge.net/lists/listinfo/xcat-user
> <https://lists.sourceforge.net/lists/listinfo/xcat-user>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
