Hi,
On 07/05/2017 04:42 PM, Xiao Peng Wang wrote:
No, bmcdiscovery is not mandatory for sequential discovery.
The correct procedure should be:
1. start sequential discovery first: nodediscoverstart
2. boot the node, then you could see the following messages
xcat.discovery.seqdiscovery
But in your case that there was no any discovery messages after starting
'nodediscoverstart', so you need check the status of the your nodes.
Yes, so I tried the nodediscoverstart with an IP range instead of just
the single node hostname:
# nodediscoverstart noderange=172.30.241.2-200 -V
Sequential Discovery: Started:
Number of free node names: 1
====================Free Nodes===================
NODE HOST IP BMC IP
172.30.241.2-200 --no free-- --no free--
If I understand correctly, there are no free nodes available for
discover, which might be my problem?
On the node side console, the only logs I have are the bellow:
Jul 5 17:22:51 172.30.241.69 (none) xcat.genesis.doxcat: Getting
initial certificate --> 172.30.240.1:3001
Jul 5 17:23:11 172.30.241.69 (none) xcat.genesis.doxcat: Running
getdestiny --> 172.30.240.1:3001
Jul 5 17:23:31 172.30.241.69 (none) xcat.genesis.doxcat: Received destiny=
Jul 5 17:23:31 172.30.241.69 (none) xcat.genesis.doxcat: The destiny=,
destiny parameters=
Jul 5 17:23:31 172.30.241.69 (none) xcat.genesis.doxcat: Unrecognized
directive (dest=)
Jul 5 17:23:37 172.30.241.69 (none) xcat.genesis.doxcat: ... Will
retry xCAT in 210 seconds
Jul 5 17:23:47 172.30.241.69 (none) xcat.genesis.doxcat: ... Will
retry xCAT in 200 seconds
Jul 5 17:23:57 172.30.241.69 (none) xcat.genesis.doxcat: ... Will
retry xCAT in 190 seconds
Jul 5 17:24:07 172.30.241.69 (none) xcat.genesis.doxcat: ... Will
retry xCAT in 180 seconds
Best Regards
----------------------------------------------------------------------
Wang Xiaopeng (王晓朋)
Manager for HPC SW Dev: xCAT, ESSL, SMI, Test
IBM China Systems Laboratory (CSL)
Tel: 86-10-82453455
Email: [email protected]
----- Original message -----
From: Nicolas Roosen <[email protected]>
To: <[email protected]>
Cc:
Subject: Re: [xcat-user] 回复： xcat.genesis.doxcat: Unrecognized
directive (dest=)
Date: Wed, Jul 5, 2017 3:53 PM
Hi,
here are some logs.
So first we removed an unwanted server from the discovery process:
[...]
I might miss something, but can't find out what.
Is the "bmcdiscover" absolutely mandatory in a sequential discovery
process?
Thanks.
Nicolas
On 07/05/2017 03:23 AM, Xiao Peng Wang wrote:
> Please show out the logs in MN during the discovery happens.
>
> Using IBM Verse, send from my iPhone.
>
>
------------------------------------------------------------------------
> 在 2017年7月5日，上午12:37:37，[email protected] 写道：
>
> From: [email protected]
> To: [email protected]
> Cc:
> Date: 2017年7月5日 上午12:37:37
> Subject: [xcat-user] xcat.genesis.doxcat: Unrecognized directive
(dest=)
>
> Hello,
[...]
--
Nicolas
--
Nicolas
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
